Author Topic: New 44 Mag Barrel slugged!!  (Read 554 times)

0 Members and 1 Guest are viewing this topic.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
New 44 Mag Barrel slugged!!
« on: November 16, 2007, 12:56:46 PM »
Got my 44mag and 357mag barrels today, slugged the 44, .424" lands and.4285 in the grooves, not real deep, but nice and tight!! ;D

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MtJerry

  • Trade Count: (4)
  • A Real Regular
  • ****
  • Posts: 539
Re: New 44 Mag Barrel slugged!!
« Reply #1 on: November 16, 2007, 03:24:15 PM »
I am officially jealous ...   ;D
:D

Offline turkeyeye

  • Trade Count: (1)
  • Member
  • *
  • Posts: 62
Re: New 44 Mag Barrel slugged!!
« Reply #2 on: November 16, 2007, 03:30:24 PM »
what kind of recoil does the 44 mag. barrel have.  Is it comparable to 223, 243 or what.  I can't imagine that it would be worse than a 243, but hoping that it is around 223 level.  That would make a great youth gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: New 44 Mag Barrel slugged!!
« Reply #3 on: November 16, 2007, 03:35:37 PM »
Haven't shot mine yet, but I suspect it's real mild, even those shooting 300gr XTPs at almost 2000fps in their Supermags don't have any complaints.

http://www.chuckhawks.com/recoil_table.htm

I checked the throat, I can reach the lands with the 240gr XTP with an acceptable amount of bullet seated in the case, 300gr bullets would be easy.

The 357 has the expected real long throat as they all do, the 180gr Hornady SSP touching the lands would be just out of the 360 Dan Wesson brass which does fit in the chamber.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline handi243

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 1119
Re: New 44 Mag Barrel slugged!!
« Reply #4 on: November 16, 2007, 10:37:18 PM »
Dang Tim your going to make me spend some more $$$$$