Author Topic: H&R/Hastings 20ga 3 1/2 ultra slug hunter.  (Read 1568 times)

0 Members and 1 Guest are viewing this topic.

Offline 30-30 single

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
  • Gender: Male
  • i love my handi
H&R/Hastings 20ga 3 1/2 ultra slug hunter.
« on: January 20, 2008, 09:40:54 AM »
Good afternoon all i was just poking around on gun-broker and found two H&R/hastings NIB 20ga chambered in 3/12 ultra sluger, i went on the hastings site and cannot find any offerings for H&R.  

Offline Sluggin McLouvin

  • Trade Count: (0)
  • Posts: 4
Re: H&R/Hastings 20ga 3 1/2 ultra slug hunter.
« Reply #1 on: January 20, 2008, 09:53:25 AM »
Looks like you can buy the gun from Hastings:
http://www.hastingsammunition.com/id4.html

or get them to rechamber your existing barrel:
http://www.hastingsammunition.com/id11.html


Offline tfranklin7

  • GBO Supporter
  • Trade Count: (163)
  • Contributor
  • *****
  • Posts: 408
  • Gender: Male
Re: H&R/Hastings 20ga 3 1/2 ultra slug hunter.
« Reply #2 on: January 23, 2008, 05:51:20 PM »
There is a great article in the March 2008 issue of GUNS magazine on the H&R 20ga 3 1/2" USH/Hastings conversion ,only bad thing is it voids the H&R warranty.  TF
"A government big enough to give you everything you want, is big enough to take away everything you have." - Thomas Jefferson

Offline snapcrackpop

  • GBO Supporter
  • Trade Count: (15)
  • A Real Regular
  • *****
  • Posts: 546
  • Gender: Male
  • Baloo - blue weim
Re: H&R/Hastings 20ga 3 1/2 ultra slug hunter.
« Reply #3 on: June 23, 2008, 02:52:34 PM »
oops, sorry wrong one.
Got:
Handi VP 22/410, 410, 20, 17M2, .223, 357MAX, 50cal ML SS w/MU plug


Offline Bugtussle

  • Trade Count: (0)
  • Member
  • *
  • Posts: 22
Re: H&R/Hastings 20ga 3 1/2 ultra slug hunter.
« Reply #4 on: June 28, 2008, 06:11:49 AM »
Not sure why you would want a 3 1/2" USH.   I sshoot 2 3/4 " in mine & it works first time every time on deer.   Come to think about it , i've never seen a 3 1/2" 20 ga. slug.

Offline KLT

  • Trade Count: (0)
  • Member
  • *
  • Posts: 13
Re: H&R/Hastings 20ga 3 1/2 ultra slug hunter.
« Reply #5 on: June 29, 2008, 07:45:11 AM »
Sorry, but I have to ask what makes a 3 1/2" slug better than a 12 gauge.  I've fired 3" fosters in my 12 gauge,  and thought that was abusive enough. 

Offline snapcrackpop

  • GBO Supporter
  • Trade Count: (15)
  • A Real Regular
  • *****
  • Posts: 546
  • Gender: Male
  • Baloo - blue weim
Re: H&R/Hastings 20ga 3 1/2 ultra slug hunter.
« Reply #6 on: June 29, 2008, 08:26:35 AM »
I'm more interested in the new ammo than the 3.5" 20ga barrel.  They make the slugs in 2 3/4, 3 and 3.5".
Just curious if this accuracy (and trajectory) is better than other slugs...
Got:
Handi VP 22/410, 410, 20, 17M2, .223, 357MAX, 50cal ML SS w/MU plug


Offline oneshotonekill

  • Trade Count: (15)
  • A Real Regular
  • ****
  • Posts: 503
Re: H&R/Hastings 20ga 3 1/2 ultra slug hunter.
« Reply #7 on: July 08, 2008, 01:52:31 PM »
I'm more interested in the new ammo than the 3.5" 20ga barrel.  They make the slugs in 2 3/4, 3 and 3.5".
Just curious if this accuracy (and trajectory) is better than other slugs...

I can't speak to accuracy having never shot these slugs but as to trajectory they are no better than most of the slugs on the market.  The BC of the only slug offered as 3.5" 20ga is .110 about the same as a brick.  The sabot doesn't discard until impact so you have 410 grains of brick leaving the barrel at 2000fps.  Now take a 2.75 inch SST with much better BC at 250 grains leaving the muzzle at 1900 and the trajectory curve is much flatter due to the better BC.  I can not see why anyone would choose to shoot 410 grain 3.5" slugs at anything smaller than buffalo.  I also heard from a guy that tested some of these slugs that the recoil is brutal.  I think they could take the 3.5" concept a different direction and offer higher BC bullets at say 2500fps and have something but based on what is available now I don't see the logic.  I also don't understand why they are cutting the H&R barrels down to 19" on these things.