« previous next »
Pages: [1]   Go Down

Author Topic: 44 Mag/444 Marlin????  (Read 2658 times)

0 Members and 1 Guest are viewing this topic.

Offline cajun

  • Trade Count: (0)
  • Member
  • *
  • Posts: 79
44 Mag/444 Marlin????
« on: November 06, 2008, 03:46:48 AM »
I have an H&R in 444 Marlin.  I was told by a friend that this barrel can also shoot 44 Mag.  Is this possible/advisable?  He assures me that he saw an H&R rifle that was stamped 44Mag/444Marlin on the barrel.  I looked at my barrel and it is stamped 444 Marlin only.

Thanks,,,,,
Logged

Offline Dixie Dude

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 4129
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #1 on: November 06, 2008, 03:51:41 AM »
I haven't tried it but I heard you could in a pinch.  However, there is a long jump to the rifling for the 44 mag.  I also know that a 410 shotgun shell will also fit in a .444.
Logged

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26942
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #2 on: November 06, 2008, 03:54:31 AM »
NO NO NO. Look at the cartridge specs this is not a smart thing to do. It's kinda like shooting a .22LR in a .22 Mag chamber. The case is gonna balloon out and might fail. Can you do it yes. Should you do it NO.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #3 on: November 06, 2008, 04:08:57 AM »
+1 Graybeard is absolutely correct.
Logged
Great men have vision and resolve to make dreams come true.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #4 on: November 06, 2008, 05:15:34 AM »
As has been said, the casehead specs are different, .457" vs .471",  if you're not concerned about high pressure gas at 36kpsi blasting past the ruptured case and thru the firing pin channel and breech at you, take your chances. The only thing H&R 44mags and 444s have in common is they were both 1:38" twist barrels at one time, current production .444 is 1:20".

Tim

http://stevespages.com/page8d.htm
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bishopgrandpa

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 113
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #5 on: November 06, 2008, 05:22:41 AM »
At current prices buy the other barrel or whole assembly if you want to play around. It was good you asked but do heed the above replies. Why take chances?
Logged

Offline skifastchad

  • GBO Supporter
  • Trade Count: (17)
  • Contributor
  • *****
  • Posts: 332
Re: 44 Mag/444 Marlin????
« Reply #6 on: November 06, 2008, 06:42:25 AM »
Quote from: cajun on November 06, 2008, 03:46:48 AM
He assures me that he saw an H&R rifle that was stamped 44Mag/444Marlin on the barrel. 

IF he really saw such a thing, Id wager that it said 44Mag/445supermag.  Definitely not .444Marlin
Logged

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: 44 Mag/444 Marlin????
« Reply #7 on: November 06, 2008, 06:57:33 AM »
Quote from: Dixie Dude on November 06, 2008, 03:51:41 AM
I haven't tried it but I heard you could in a pinch.  However, there is a long jump to the rifling for the 44 mag.  I also know that a 410 shotgun shell will also fit in a .444.



Where can I find a case drawing for a .410 shothell (brass)
I thought .410 and .45 Colt were interchangable.


Spanky

Logged

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #8 on: November 06, 2008, 09:36:31 AM »
I do have a 444 Marlin case and I had some 410 shells. I am not positive on this, but I do not think the 410 will fit into the chamber. I think I tried it. Even if it did, there would not be enough room for crimp to open up into the chamber, it would open up at least partially into the rifling, even a 2 1/2" shell. Further, the rifling would spin the shot charge to the point of being useless past 10 feet.
Logged
Great men have vision and resolve to make dreams come true.

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #9 on: November 06, 2008, 09:39:20 AM »
AThe 410 shell will fit a 45 chamber, if the chamber is long enough to accommodate it. the 45/410 guns have a very long chamber/throat. It is so long that usually the 45's do not shoot that well. They usually have a screw in/on choke for the 410 that needs to be removed.
Logged
Great men have vision and resolve to make dreams come true.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #10 on: November 06, 2008, 09:56:27 AM »
Quote from: LaOtto222 on November 06, 2008, 09:39:20 AM
AThe 410 shell will fit a 45 chamber, if the chamber is long enough to accommodate it. the 45/410 guns have a very long chamber/throat. It is so long that usually the 45's do not shoot that well. They usually have a screw in/on choke for the 410 that needs to be removed.

I don't own one, but I think the whole gun is a bad idea.  That's probably why I don't want one.
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline cowboyup453

  • GBO Supporter
  • Trade Count: (82)
  • A Real Regular
  • *****
  • Posts: 685
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #11 on: November 06, 2008, 12:02:41 PM »
I found this pick a while back. This 44 mag was fired in a 444 marlin no by me though.

Logged

Offline Duckhunter39480

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 111
Re: 44 Mag/444 Marlin????
« Reply #12 on: November 06, 2008, 12:54:32 PM »
The picture posted by Cowboy453 is not a freak, one of kind that only happends occasionally.  The diameter of the 444 just ahead of the rim is larger than the 44 Mag and the 44 Mag case will either swell (usually offcenter) to fill the space or rupture as in the picture.  There is no support around the case and the results are always bad; the hotter the load, the worse the results.  I would do this only if the 44 Mag was the only bullet I had left and the bear was 5 feet away.  If the bear was 10 feet away, I would run first. 
Logged
You should have said something; I didn't know I had struck a nerve.

Offline inluvwithsara

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 167
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #13 on: November 06, 2008, 12:55:03 PM »
firing any catridge in any gun that is not made for is extreemly foolish...
Logged
Slow is smooth, smooth is fast.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #14 on: November 06, 2008, 01:04:40 PM »
That's really hard on brass, talk about short brass life!! ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Duckhunter39480

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 111
Re: 44 Mag/444 Marlin????
« Reply #15 on: November 06, 2008, 01:10:51 PM »
There are exceptions to the "not made for it" rule.  There are plenty of pistol type cartridges that offer this ability as a bonus.  Some examples are the 22 short, long and long rifle; the 38 spcl in a 357 Rem Mag.; the 32 H & R Mag and other 32???? in the new 32 Ruger Mag; the 40 S & W in the 10mm Revolver and the 44 Special in the 44 Rem Mag.  I understand where some of the belief that some cartridges can be fired in a similar chamber are rooted but those differences do not necessarily make the cross loading dangerous.  In the case of the 44 Mag in the 444 Marlin, the differences are dangerous and the practice should be avoided.
Logged
You should have said something; I didn't know I had struck a nerve.

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: 44 Mag/444 Marlin????
« Reply #16 on: November 06, 2008, 01:20:02 PM »
My guess on the 44Rem Mag / 444 Marlin stamp on the barrel is that that barrel started out as a 44 mag and was rechambered to 444 marlin. 
Logged

Offline Slufoot

  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1004
Re: 44 Mag/444 Marlin????
« Reply #17 on: November 06, 2008, 02:08:17 PM »
Quote from: mcwoodduck on November 06, 2008, 01:20:02 PM
My guess on the 44Rem Mag / 444 Marlin stamp on the barrel is that that barrel started out as a 44 mag and was rechambered to 444 marlin. 

Exactly what I was thinking!
Logged
Pages: [1]   Go Up
« previous next »