« previous next »
Pages: [1]   Go Down

Author Topic: Heads up on Used roll pins  (Read 1430 times)

0 Members and 2 Guests are viewing this topic.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Heads up on Used roll pins
« on: May 04, 2009, 11:49:50 AM »
I guess this is one of those little things that we don't foresee until it happens. ::) I was working with the 35 Remington today, went to remove the barrel and it wouldn't come off the frame, finally figured out that the small extractor cam roll pin had worked partially out preventing barrel removal!! :-\ So anyone reusing roll pins that feel a little bit loose when reinstalled may want to either use new roll pins(best), or do as I did as a quick remedy and stake the pin in with a centerpunch offsetting a little bit of metal on each side of the hole to prevent the roll pin from working its way out. A little Loctite may work too.  ;)

I've added this to the Ejector to Extractor conversion thread in the FAQs.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Singleshotsam

  • I.T. Professional
  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1682
  • Gender: Male
Re: Heads up on Used roll pins
« Reply #1 on: May 04, 2009, 09:02:32 PM »
Thanks for the heads up Tim!
Logged
I'm voting 3rd party in this election by writing in Jesus Christ for president.  Sadly even if this were an option most of you would still vote Republican because "It's a two party system."

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Heads up on Used roll pins
« Reply #2 on: May 04, 2009, 10:21:46 PM »
I'll do the '06 this morning.  Thanks Tim
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Hammerspur

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 542
  • Gender: Male
Re: Heads up on Used roll pins
« Reply #3 on: May 04, 2009, 10:55:16 PM »
Thanks for that tip, Tim.

On larger size roll pins that seemed a little 'tired' I've driven a small nail or something through them to open the curl some before re-use.
Logged
Steve
Quote
Of course guns are dangerous... if they weren't they wouldn't be good for anything!

Offline aromakr

  • GBO Supporter
  • Trade Count: (1)
  • Avid Poster
  • *****
  • Posts: 102
Re: Heads up on Used roll pins
« Reply #4 on: August 24, 2009, 07:27:30 AM »
I'm new to the site, and have seen several references to "See the FAQ's", however I can't seem to find the way to the FAQ's. How do I get there???
Bob
Logged

Offline fredster22

  • GBO Supporter
  • Trade Count: (195)
  • A Real Regular
  • *****
  • Posts: 758
  • Gender: Male
Re: Heads up on Used roll pins
« Reply #5 on: August 24, 2009, 07:33:01 AM »
Navigate back to top of this forum - Look up 2 columns
Logged
All H&R 17m2 Sportster-17hmr Sportster-22lr Leatherneck semi-22mag ultra-22mag 700semi-22 hornet/20 258-221 fireball
223 bull-22-250 bull-243 bull Ultra--762x39-7x57m
30-30 157man-30-30/20ga 258--32-20 cust
-357max factory-357mag/20ga 258-44mag/20
ga 258-45lc-45/70-50 Sidekick-50
Huntsman-12ga Trap-12ga TDC
20ga TDC-20ga 22" 258x2-28ga 22"
Topper-410 slug-410 22"Topper-410 Charmer

Offline JerryKo

  • GBO Supporter
  • Trade Count: (64)
  • A Real Regular
  • *****
  • Posts: 954
  • Gender: Male
Re: Heads up on Used roll pins
« Reply #6 on: August 24, 2009, 07:33:37 AM »
It is the 6th subject from the top of this forum.  FREQUENTLY ASKED QUESTIONS.
Lots of good reading....goodluck.
Jerry
Logged
"It's not whether you get knocked down, it's whether you get up."- Vince Lombardi
Pages: [1]   Go Up
« previous next »