« previous next »
Pages: [1]   Go Down

Author Topic: Topper158 .410  (Read 1013 times)

0 Members and 1 Guest are viewing this topic.

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Topper158 .410
« on: March 12, 2010, 08:07:46 PM »
I picked up a topper158 .410 on the cheap.
I'm looking to turn it into a project and was wondering what my options are?
The barrel is 36" and marked 410 Gauge-P (missing the bead) Not very Handi!
The frame is marked Harrinton & Richardson, Inc.
AE US Pat 2876576
I'm going out on a limb and say the AE is the year prefix 1968.
It does have a plastic trigger guard and the hammer has been bobbed.
I'm assuming that the only centerfire that will work on this freame would be a 22 Hornet?
Thanks
-gary
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Topper158 .410
« Reply #1 on: March 13, 2010, 12:48:27 AM »
does it have a serial number? If not that AE most likely does not indicate the year of manufacture.....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: Topper158 .410
« Reply #2 on: March 13, 2010, 04:03:56 AM »
AE US Pat 2876576 is all that is on it.
I ment to type 26" barrel, but it is a 28" after a measure and not eyeing it. -g
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Topper158 .410
« Reply #3 on: March 13, 2010, 04:22:20 AM »
I think they made all the 158's on the same frame. They made them in 30-30 as well as shotgun gauges so it seem that a 30-30 barrel should be safe, as well as a .357 Mag and a .44 Mag. You would have to make up your own mind in that, as well as buy and fit the other barrels to that frame. The company will not do anything to a gun that old..All the best of luck....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Markus

  • Moderators
  • Moderator
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Re: Topper158 .410
« Reply #4 on: March 13, 2010, 10:30:13 AM »
I was getting ready to offer you way too much money for that 36" barrel.  I have a 158 tracker 1/30-30 combo
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun

Offline a4beltfed2000

  • Trade Count: (16)
  • A Real Regular
  • ****
  • Posts: 593
Re: Topper158 .410
« Reply #5 on: March 14, 2010, 01:40:06 AM »
same here, a 36 inch barrel 410 would be almost a good as my 36 inch 10 ga shotgun
Logged
H&R/NEF 10, 12,16 20 28 ,410 .243 45 357 45lc. 1919a4, uzi, sten mK 2,3,5 M2HB, 1917a1, ak74(2) amd 65, RPK (2) 11 aks and 50 other guns....

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: Topper158 .410
« Reply #6 on: March 14, 2010, 06:00:23 AM »
Sorry guys your slow. I had a PM from MSP that morning, hours later inquiring about the barrel. We have some true Handiholics around here!
I really would like to make a 30/30 or other shooter out of it if I can find what I need to do so.
The first thing that needs to be done is a hammer replacment and the right side rear frame has minor damage. It would appear that someone tried to force a screwdriver between the frame and barrel.
Does the lug look like it was rewelded again or just factory.
Sorry for so many questions as this is my first used older Handi.
My two others were bought new 308 and 357.






Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline spooked

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 515
  • Gender: Male
Re: Topper158 .410
« Reply #7 on: March 14, 2010, 07:09:46 AM »
The only difference I've found in my 158 rifles and shotguns is that the rifles have a smaller diameter firing pin.. :-\ Nice catch ye made there on that profiled receiver.. ;)
Logged
Lost between sunrise and sunset yesterday-one golden hour...never to be found or reclaimed:-(

Offline Hofs01

  • GBO Supporter
  • Trade Count: (37)
  • A Real Regular
  • *****
  • Posts: 581
  • Gender: Male
Re: Topper158 .410
« Reply #8 on: March 14, 2010, 07:10:44 AM »
You may check out this auction and contact the seller. He has a had a bunch of these barrels for sale over the years. It IS what your looking for!
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=149548569
Logged
IF we're not supposed to eat animals,
how come God made 'em outta meat?

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Topper158 .410
« Reply #9 on: March 14, 2010, 07:16:56 AM »
Try your .357 barrel in the frame and see if it fits or comes close to fitting. If it does fit use the forearm that came with the .357 barrel and shoot it. If it does not fit, but is close and can be fitted, start looking for a barrel for that frame in 30-30, .22 Hornet, .357 Mag, or .44 Mag...It looks good....<><....:)

will a hammer spur fit on the hammer so it can be safely tightened?
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Hofs01

  • GBO Supporter
  • Trade Count: (37)
  • A Real Regular
  • *****
  • Posts: 581
  • Gender: Male
Re: Topper158 .410
« Reply #10 on: March 14, 2010, 07:42:07 AM »
unfortunately, you will only find .410, 20 ga, 30-30, and 22 jet to match that profiled design. however the other barrels will fit the will just stick up higher.
Logged
IF we're not supposed to eat animals,
how come God made 'em outta meat?

Offline Hofs01

  • GBO Supporter
  • Trade Count: (37)
  • A Real Regular
  • *****
  • Posts: 581
  • Gender: Male
Re: Topper158 .410
« Reply #11 on: April 28, 2010, 05:37:12 PM »
Hey pigboy i found this today in my traves through ole gunbroker http://www.gunbroker.com/Auction/ViewItem.aspx?Item=166561789
Logged
IF we're not supposed to eat animals,
how come God made 'em outta meat?
Pages: [1]   Go Up
« previous next »