Author Topic: First home made Handi stock (Read 1991 times)

brehenkel · « **on:** January 08, 2011, 03:03:18 PM »

Got a new Handi in 357 mag on Thursday. It had the black synthetic stock on it and thought I would try making a wood stock for it out of some walnut I had. This is a rifle I want to ream to Maxi for deer season next year. Just wanted to see what you guys thought about the stock. Open for all ideas and thoughts.

Thanks Brian.

sorry for the blurry pic was done with a phone.

Datil · « **Reply #1 on:** January 08, 2011, 03:15:26 PM »

Hey that is a good looking stock in MHO. I got a 357 mag a few years back and as quick I could reamed to a Maxie It is a shooter. I love that maxie I say go for it/

Slufoot · « **Reply #2 on:** January 08, 2011, 03:17:21 PM »

Very nice Brian.
The cheeck piece looks different, is the stock made for a lefty?

GOOD SHOOTING!
Slufoot

blind ear · « **Reply #3 on:** January 08, 2011, 03:18:36 PM »

U done good. ~~did you build the forearm spacer into the forearm.~~ (I see) Yep that looks good. Clean and smooth. ear

spikehorn · « **Reply #4 on:** January 08, 2011, 03:19:33 PM »

That is a sweet looking gun! nice job! I am so jealous of you guys that have the talent to work with wood like that.

Dirty Bob · « **Reply #5 on:** January 08, 2011, 03:28:24 PM »

NICE!!!!

I really like the way that looks. I've been considering a full-length stock on a Pardner shotgun, just for fun. Did you stay with just one screw attaching it, or is the end of the forearm anchored in some way?

Very well done, sir!

Dirty Bob

brehenkel · « **Reply #6 on:** January 08, 2011, 03:41:22 PM »

The stock is built for a righty the recoil pad is offset to the right of center. As of right now the fore arm is only attached with the one screw. I was thinking of making a barrel strap of some sorts or maybe even a internal strap tapped to accept another screw more forward. Thanks for the nice words from you guys. Anybody hear if the Maxi reamer made its way back yet?

Thanks Brian

Have to thank Tim again for the fore arm measurements.

D Humbarger · « **Reply #7 on:** January 08, 2011, 04:24:49 PM »

Nice going. A lot of work huh?

brehenkel · « **Reply #8 on:** January 08, 2011, 04:34:54 PM »

It's work I guess but hard to classify it as work when you enjoy it so much. Plus I think the wood is just so much more attractive than plastic. I say I had about 10 hours in those 2 pieces.

Brian.

Dinny · « **Reply #9 on:** January 08, 2011, 04:38:43 PM »

Looks great! How much more walnut do you have?

Thanks, Dinny

Jon in TN · « **Reply #10 on:** January 08, 2011, 04:40:53 PM »

I like it allot. Nice job!

LONGTOM · « **Reply #11 on:** January 08, 2011, 05:53:50 PM »

Very nice job indeed!!!

LONGTOM

quickdtoo · « **Reply #12 on:** January 08, 2011, 06:19:17 PM »

Awesome, great job!! The reamer goes out to spartacus1239 Monday, there are two member after him, if you want to get on the list, PM me your name and mailing address.

Tim

AtlLaw · « **Reply #13 on:** January 09, 2011, 05:41:27 AM »

Great job!

zoner · « **Reply #14 on:** January 09, 2011, 06:37:59 AM »

very nice

Flynmoose · « **Reply #15 on:** January 09, 2011, 08:00:05 AM »

All I can say is WOW!! Keep up the good work!
FM

Saloon slug · « **Reply #16 on:** January 09, 2011, 10:23:50 AM »

That is beautiful

. Wish I was that talented keep the fine work.

bigbird09 · « **Reply #17 on:** January 09, 2011, 10:38:13 AM »

very nice. Is there a place that has a walk through to making such a stock? I have seen a couple full length stocks on here before and I kinda like the looks of them, and was kinda wanting one for my .223.

Thanks,
Levi

oldmike · « **Reply #18 on:** January 09, 2011, 11:40:22 AM »

That wood looks great! Hope your'e serious about the forearm production...would really like to get my hands on one.

Hit or Miss · « **Reply #19 on:** January 09, 2011, 02:34:44 PM »

That's some very nice walnut! Good job. What's the finish on the reciever? Duracoat?

Rustyinfla · « **Reply #20 on:** January 09, 2011, 02:42:56 PM »

Very Nice

mechanic · « **Reply #21 on:** January 09, 2011, 03:26:14 PM »

My friend, with that stock the guys at the range would think you had a $1000.00 rifle...not a Handi...great job!

Ben

quickdtoo · « **Reply #22 on:** January 09, 2011, 04:26:50 PM »

I hate to be a wet blanket, but GBO rules don't allow buying and selling in discussion forums except by paid advertisers, selling in the classifieds is limited to personally used items, not something made for resale, please refrain from making offers to buy or sell.

Tim

10gaugeMS^_^ · « **Reply #23 on:** January 09, 2011, 07:09:11 PM »

Hell just pm I have a link to a company who makes reproduction stock for the h&r and custom designs. I have talked them before about a schnable totems for my 10 Ga. Their prices arevhigh. So just hit me up ill give you the link

Old Grizz · « **Reply #24 on:** January 10, 2011, 12:22:46 AM »

Very, very nice.

bobg · « **Reply #25 on:** January 10, 2011, 12:35:50 AM »

That is some great work. Sure wish my 17HMR looked like that.

brehenkel · « **Reply #26 on:** January 10, 2011, 01:10:13 AM »

I apologize Tim for where this ended up going. Please guys lets keep the the forum what it is suppose to be. I do not want to be the cause of problems here in this great place of Greybeard Outdoors. Thanks for all the kind words and again I apologize Tim.

Thanks

Brian.