« previous next »
Pages: [1]   Go Down

Author Topic: 7X57AI  (Read 706 times)

0 Members and 1 Guest are viewing this topic.

Offline ham7777

  • GBO Supporter
  • Trade Count: (52)
  • Contributor
  • *****
  • Posts: 295
  • Gender: Male
  • Two wrongs do not make a right.
7X57AI
« on: May 07, 2011, 03:08:45 PM »
Just found out from are friends at 4D Reamer that I can ream a 7mm08 to the 7X57AI. 8) Seeing that I may never find a 7X57 for my price  ::) I am going to go ahead rent the reamer today. I also talked to the folks at Lee dies and while they do not product the &X57AI dies. They told me to use their 7X57 collet die. If I have any trouble with this they said to send them the die and a case and they would make it work for me NO charge.  8) 8) ;D
Wow this has been a good day  ;D ;D  Tom Ham7777
Logged
Highpower Rifle Sharpshooter Class NRA Endowment Member Army 68-71 RVN 1969 117 AHC Warlords/135 AHC EMU Get the Bloody Job Done/ Me and the Aussies at BearCat RVN 1969

.22 Hornet,.223,.243,.308,38-55(3)(2),44mag.,.45Colt,45-70(20+) .20ga.,(3)16ga.,Huntmans .50cal. Huntman's .58cal. 20 ga. Green Wing,12ga Trap,30-30 AI,35 Remington.12ga. Turkey.22-250 Rem,30-30Win.280 Rem, 7mm08Rem,.30Ebbs,.410/45Colt,.410,30-06,.45 Huntsman,12GA. Huntsman,.44mag Shirkari 45-70 Shirkari (2) 22-250Rem. 25-06 .270 .17Rem Fireball (stub)  7X57AI. 500S&W mag. 450 Marlin mag. 2 H&R 45-70 Trap Doors 2 H&R 48 16ga.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 7X57AI
« Reply #1 on: May 07, 2011, 03:37:41 PM »
 8), I really like the collet neck size dies, wish I had them for everything bottleneck. If you dont go for max velo and pressure you might not have to resize the body of the case to get good ejection/extraction, just downsize the neck enough to hold the next bullet well. If cases are a little 'sticky' just back the charge off a bit and retry until they arent.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline briannmilewis

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 1017
  • Gender: Male
Re: 7X57AI
« Reply #2 on: May 07, 2011, 04:40:19 PM »
Was wondering if you considered the 284 Winchester?
Logged

Offline ham7777

  • GBO Supporter
  • Trade Count: (52)
  • Contributor
  • *****
  • Posts: 295
  • Gender: Male
  • Two wrongs do not make a right.
Re: 7X57AI
« Reply #3 on: May 07, 2011, 07:29:35 PM »
I have used Lee collet dies for the .308,30-06 and 22-250 so far so good. ;)

I may try the .284 next,the 7X57 is just one of favorite rounds I have it in single shot, bolt action and even a M-1 Garand. They all shoot great.   Tom  8) ;D
Logged
Highpower Rifle Sharpshooter Class NRA Endowment Member Army 68-71 RVN 1969 117 AHC Warlords/135 AHC EMU Get the Bloody Job Done/ Me and the Aussies at BearCat RVN 1969

.22 Hornet,.223,.243,.308,38-55(3)(2),44mag.,.45Colt,45-70(20+) .20ga.,(3)16ga.,Huntmans .50cal. Huntman's .58cal. 20 ga. Green Wing,12ga Trap,30-30 AI,35 Remington.12ga. Turkey.22-250 Rem,30-30Win.280 Rem, 7mm08Rem,.30Ebbs,.410/45Colt,.410,30-06,.45 Huntsman,12GA. Huntsman,.44mag Shirkari 45-70 Shirkari (2) 22-250Rem. 25-06 .270 .17Rem Fireball (stub)  7X57AI. 500S&W mag. 450 Marlin mag. 2 H&R 45-70 Trap Doors 2 H&R 48 16ga.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 7X57AI
« Reply #4 on: May 08, 2011, 04:54:34 AM »
Ive been using Lee products for 30+ years, and although some people dont care for them, they have served me well
and my few problems were quickly and at no cost resolved. It is a plus for me that they are a Wisconsin company so I can support a 'home town' firm.
They certainly will do some 'custom' work for a very reasonable price, glad to hear they will work with you.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline earl54

  • Trade Count: (1)
  • Member
  • *
  • Posts: 22
  • Gender: Male
Re: 7X57AI
« Reply #5 on: May 08, 2011, 03:28:50 PM »
Will the rebated rim on the 284win cause ejection problems?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 7X57AI
« Reply #6 on: May 08, 2011, 03:43:32 PM »
Quote from: earl54 on May 08, 2011, 03:28:50 PM
Will the rebated rim on the 284win cause ejection problems?

It didn't on my 300WSM experimental barrel, it worked fine as an ejector, an extractor barrel should be even better. One member here has a 6mm-284, seems to work fine.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline earl54

  • Trade Count: (1)
  • Member
  • *
  • Posts: 22
  • Gender: Male
Re: 7X57AI
« Reply #7 on: May 08, 2011, 05:16:23 PM »
Thanks Tim,how did the 300wsm work pressure wise( and overall )
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 7X57AI
« Reply #8 on: May 08, 2011, 06:44:15 PM »
Not well at all, I couldn't achieve even 30-06 max velocities due to the breech thrust, same reason no one makes short mag Encore barrels any more, it became the donor stub for my 6.5x55.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »