Graybeard Outdoors (GBO Reloaded)

H&R Talk => Misc H&R talk, Collectibles, Handguns etc => Topic started by: kody on September 08, 2008, 05:22:55 PM

Title: Hammer extender removal
Post by: kody on September 08, 2008, 05:22:55 PM

I want to remove and remount on the L.side an NEF hammer -extender without crushing it . That is what started to happen on my "don't bother to ask" attempt. So, when all else fails ,read the directions [or ask the forum] .  Ken

Title: Re: Hammer extender removal
Post by: stimpylu32 on September 09, 2008, 12:37:02 AM

Ken

Down inside the ext you will find a very small socket head screw that needs an allanwrench to loosen , ( don't remember the size ) back that screw off a couple turns and the ext should slide right off .

stimpy

Title: Re: Hammer extender removal
Post by: kody on September 09, 2008, 08:05:11 AM

Thank you ,Stimpy. Are these ever loc-tited?  Ken

Title: Re: Hammer extender removal
Post by: Swampman on September 09, 2008, 08:23:53 AM

They are self locking set screws.  The NEF version & the Uncle Mike's version use different sized allen wrenches by the way.