Graybeard Outdoors (GBO Reloaded)
Rifle and Optics Forums => CVA and Knight Rifles, Shotguns and Muzzle loaders => Topic started by: carbineman on December 07, 2010, 04:01:33 AM
-
*All caliber barrels are extractor.
*The factory trigger pull is 3-6 lbs. You can have it lowered by sending it back. I couldn't find out where back actully was. ;D
*The camo stock set shown on the CVA video supposedly is N/A on the Scout.
*The Dead On factory (all in one) mount ring height will accomodate a 40mm scope objective. If you choose to go lower the DS412 S(stainless) or B (black) rail ($13.95)needs to be ordered, and scope rings purchased for weaver style rail.
*Barrel Twist Rates are 1 in 10 for 7mm-08 and 30-06. They indicated the Whelen was also 1-10 the .270 1 in 20(might not be right) and also the .243 1 in 20(might not be right) No info was available on the 44 mag whatsoever.
* The CS rep was very friendly but not real knowledgeable and the info he was given was not very complete.
* The phone number I used is 770-449-4687
-
Are they going to introduce new calibers? I'm wanting another single shot but I want a .308. I could get another Handi as I've had good luck with them, but I want to try one of these.
-
Are they going to introduce new calibers? I'm wanting another single shot but I want a .308. I could get another Handi as I've had good luck with them, but I want to try one of these.
No idea as to what thier future plans hold. It was difficult to obtain this information. Nice people, not very well informed though.
-
I would imagine the 243 and 270 are 10" twist as well. I don't think a 20" would work with anything except maybe the lightest bullets. My Optima Elite 243 has a 10" twist and I assume the scout has a Bergara barrel as well. If you look at Bergara's website, they listed the twist rate for everything at 10" except the 7-08 and the 45-70. Even the 22's are 10". I would imagine that the scout uses the same basic barrel blanks as the OE or Apex.
-
Hello all,
couple of questions to add, can you buy the compact stock to instal on a normal scout? also anyone that has a scout, does it look like you could cut the stock down a little more? How close are they to that 5.8 lbs they say on the site. I wish they made it in 223 also.
carl