Author Topic: Velocity Disparity  (Read 339 times)

0 Members and 1 Guest are viewing this topic.

Offline Rummer

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 224
Velocity Disparity
« on: November 21, 2006, 06:24:52 PM »
I have noticed that when I chronograph handloads I typically get a velocity of 80-100 fps less than the published velocity for a given load.

This has been true regardless of barrel length.

In my .35 whelen,for example, I shoot 58.5gr of 4320 behind a 200gr Hornady SP.  The Hornady 3rd edition lists velocity for this load, in their 22 1/2" barrel, as 2700 fps.  10 shot strings run over my chrony average 2600.

In the same rifle Remington 250 grain factory ammo lists as 2400 fps but I only get 2300 fps over my chronograph.


Has anybody seen this before?
Could I be doing something wrong?

Offline butterman

  • Trade Count: (0)
  • Member
  • *
  • Posts: 22
  • Gender: Male
Re: Velocity Disparity
« Reply #1 on: November 21, 2006, 06:58:01 PM »
Every barrel has it's own pressure limits ,that is the reason you start your powder loads low and work up , at that load, their pressure produced that vel. your's is 100 fps. slower by your chrono, there are like 10 variables , 100 fps. can be normal .  I have a browning micro-medalion with a 20" barrel I allways are 150 fps. or more off published, Do'nt worry just look for pressure or change bullets and work up again if you have to have the extra 100 fps.

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Re: Velocity Disparity
« Reply #2 on: November 22, 2006, 02:07:15 AM »
It could be a lot of things, none of which are terribly important. I could be the rifle. It could be the chronograph too. The ones most of us buy are relatively inexpensive and incorporate some level of error. They are not going to be as accurate as, say, a 3-screen Oehler.

One thing you can try is to see whether you are shooting at an angle. You need to shoot exactly parallel to the horizontal plane of the sky screens. Any variation from this will mean that the bullet is flying farther than the shortest distance between the screens and that will certainly affect readings.
Safety first

Offline Siskiyou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3417
  • Gender: Male
Re: Velocity Disparity
« Reply #3 on: November 22, 2006, 06:33:22 AM »
A year or so ago I did a lot of test firing of different reloads and factory ammunition in a Savage 110 and in a Remington 700, both in .270 Winchester Caliber.  The Savage barrel is approximately 30fps faster then the Remington barrel with 130, 140, and 150 grain loads.
Both barrels are 22-inches.  I thought about buying a 24-inch barrel for the Remington, then common sense told me to stop.  The 22-inch barrel is accurate and it has proved itself on game. 
There is a learning process to effectively using a gps.  Do not throw your compass and map away!

Boycott: San Francisco, L.A., Oakland, and City of Sacramento, CA.

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
Re: Velocity Disparity
« Reply #4 on: November 23, 2006, 04:43:06 AM »
I have never got the velosity that the manual says. I have gotten both higher and lower readings though. You must also rember than not only does it vary from barrel to barrel but the temp. and berometer will also change the velosity from the same barrel.