« previous next »
Pages: [1]   Go Down

Author Topic: Ejector problem  (Read 335 times)

0 Members and 1 Guest are viewing this topic.

Offline TFM

  • Trade Count: (0)
  • Posts: 1
Ejector problem
« on: December 05, 2006, 12:53:30 PM »
My son just replaced a broken ejector on his handirifle.Now he is having a problem with the shell going passed the ejector and on into the chamber when pushed in.Does anyone have an idea what might be causing this?Any help would be greatly appreciated.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Ejector problem
« Reply #1 on: December 05, 2006, 01:39:26 PM »
Are you sure he got the right ejector? They're caliber specific as well as those made prior to '99 were different. The lifter button, if it had one, may have been left out, also. There's a pic of the parts for a late model ejector barrel in the FAQs and help sticky.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline TFM

  • Trade Count: (0)
  • Posts: 1
Re: Ejector problem
« Reply #2 on: December 05, 2006, 02:46:23 PM »
Thanks for the answer.He does have a later model I think,with all the parts on the help page.He installed the ejector first,then the little black button in the hole in the ejector housing and then the ejector spring and the ejector latch(both pins too).
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Ejector problem
« Reply #3 on: December 05, 2006, 02:58:53 PM »
That leaves the ejector being the correct one in question. ???

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »