« previous next »
Pages: [1]   Go Down

Author Topic: When to change your washer ???  (Read 883 times)

0 Members and 1 Guest are viewing this topic.

Offline tuxdad

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 108
When to change your washer ???
« on: December 18, 2006, 05:10:38 PM »
Ok folks,

For those of you who have had a handi for a while, you know about the o-ring/rubber washer in the fore end to sweeten up the accuracy..

My question is how often do you change it?? Do you change when you accuracy starts to go  down, or are you one for changing it on a regular basis ??

Just curious is all..

Tux
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: When to change your washer ???
« Reply #1 on: December 18, 2006, 05:15:28 PM »
Change it??? Never had a problem.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline SourMash

  • Trade Count: (1)
  • Member
  • *
  • Posts: 65
    • BTO
Re: When to change your washer ???
« Reply #2 on: December 18, 2006, 06:13:36 PM »
It aint underwear. lol
Logged

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: When to change your washer ???
« Reply #3 on: December 18, 2006, 07:16:43 PM »
Quote from: tuxdad on December 18, 2006, 05:10:38 PM
Ok folks,

For those of you who have had a handi for a while, you know about the o-ring/rubber washer in the fore end to sweeten up the accuracy..

My question is how often do you change it?? Do you change when you accuracy starts to go  down, or are you one for changing it on a regular basis ??

Just curious is all..

Tux

...I use a slightly larger sized one than the recommended one in the FAQ's.....and will change it as needed by repeated barrel swapping...

Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
Re: When to change your washer ???
« Reply #4 on: December 18, 2006, 08:26:47 PM »
Quote from: Mac11700 on December 18, 2006, 07:16:43 PM
........I use a slightly larger sized one than the recommended one in the FAQ's.....and will change it as needed by repeated barrel swapping......

Mac


I agree. It really depends on how often the barrel is being swapped. The little O-ring gets a lot of wear and tear this way. I also use a larger one. It fits my forearms a bit tighter, filling in the gaps. But some do not need a larger one I have found.


-Aaron
Logged

Offline Headspace

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
  • Gender: Male
Re: When to change your washer ???
« Reply #5 on: December 19, 2006, 02:25:41 PM »
I quit using the washer and cut some .40 S&W brass to length. Drilled the forarm hole out to 7/16ths. Then glued the brass in place with just enough sticking out the top to hold the stock away from the barrel. Where the washer used to sit I filled with JB Weld. This gives a good solid metal on metal connection. My groups are consistant on both the 500 S&W and the ultra 25 06.
Logged
"knock’d the trotters from under him”  
                                   Davy Crocket

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
Re: When to change your washer ???
« Reply #6 on: December 19, 2006, 07:23:58 PM »
Cool idea.
 Do you have any pics?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: When to change your washer ???
« Reply #7 on: December 19, 2006, 07:34:46 PM »
I used a threaded lamp post to bed a CZ 452, it works very well, thought about trying it on a Handi at one time, but never got around to it. Headspace's post reminded me of it, thx!

Tim

http://cz452.com/PillarBeddingAmerican/index.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline tuxdad

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 108
Re: When to change your washer ???
« Reply #8 on: December 20, 2006, 12:59:21 AM »
I'd like to see pics of that myself, also headspace...
Any pics??

Thanks for the link Tim..:)
Logged

Offline Headspace

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
  • Gender: Male
Re: When to change your washer ???
« Reply #9 on: December 20, 2006, 12:29:45 PM »
I'll try to get some pics up tomorrow.
Logged
"knock’d the trotters from under him”  
                                   Davy Crocket

Offline Headspace

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
  • Gender: Male
Re: When to change your washer ???
« Reply #10 on: December 20, 2006, 01:43:15 PM »
Please bare with me while I learn how to post pics. This should be two pics of the ultra with the brass sleeve glued in place without the JB Weld. The other two are of the handi fore arm with JB Weld on the inside where the washer used to be. This gives just a little space between the barrel and the stock I didn't even have to sand the stock. It does position the stock down slightly so in the future I may do some sanding and readjust. The reason I went with JB Weld is because the handi 500 came loose after some heavy loads at the range. No problems since the JB Weld was added. I have not added JB to the Ultra yet but it had no problems at the range.






Logged
"knock’d the trotters from under him”  
                                   Davy Crocket

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: When to change your washer ???
« Reply #11 on: December 20, 2006, 02:41:46 PM »
Nice work!! I fixed the links so the pics show in the post. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Headspace

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
  • Gender: Male
Re: When to change your washer ???
« Reply #12 on: December 20, 2006, 02:46:15 PM »
Thanks Tim. I think i may have made them a little bit large....
Logged
"knock’d the trotters from under him”  
                                   Davy Crocket

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: When to change your washer ???
« Reply #13 on: December 20, 2006, 02:48:46 PM »
They're fine, the forum software won't let ya post em too big, it will just resize them. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »