Author Topic: Drilling/Combo pictures (Read 37807 times)

Win 88 · « **Reply #30 on:** November 26, 2008, 09:01:03 AM »

Gustav Rätzel, Berlin, drilling 16/16/8x57IR, made before 1919. The last picture shows the latched box for cartridges in the buttstock, Recknagel*s still made Simplex model.

Please click the pics for better view!

Hank08 · « **Reply #31 on:** December 02, 2008, 05:17:20 AM »

Not fancy but a wonderful shooting gun by Inman Meffert. 16 ga. 2 3/4" over 8x57 S bore, single set rifle trigger and claw mounted Pecar 4x scope with leather case for over the shoulder scope carry. Have killed several hogs and a couple of Deer with it.
Shoot mostly 187 gr. FPGC cast bullets it it. A small game load is a .330 round ball and 7 grs. unique, this will shoot into an inch at 60 yds. Full choke 16 ga. shoots almost too tight a pattern, would be good for Turkeys but not for upland game.
H08

Savage_99 · « **Reply #32 on:** December 27, 2008, 06:27:59 AM »

Busterbrown,

What a magnificent stock that gun has. Thank you for posting it.

Win 88 · « **Reply #33 on:** December 30, 2008, 04:51:36 AM »

Quote from: Hank08 on December 02, 2008, 05:17:20 AM

Full choke 16 ga. shoots almost too tight a pattern, would be good for Turkeys but not for upland game.

Nice leverspanner o-u combination! Meffert made a lot of fine and interesting models before the WW2. How much does it weigh?

Try catridges with felt wad instead of plastic in such an old gun. Chokes and forcing cones can also be adapted to modern plastic wads by a competent gun smith.

pete

Hank08 · « **Reply #34 on:** January 01, 2009, 06:55:52 AM »

Thanks, Win88. Without the band of cartridges it weights 6 1/2 lbs. A few yrs back I was at a gun show and bought a wooden case of Remington 16 ga. paper cased
shotshells. The green ribbed ones with high brass and the folded crimp with the
load noted on a disk of paper glued over the crimp, #6 shot. These have the felt wads. 25 boxes for $30. I still have about 15 boxes. These are mostly what I shoot in it.
H08

dougk · « **Reply #35 on:** November 18, 2010, 10:05:31 PM »

here is the Valmet 9.3x74r DR and combo.

Drilling Man · « **Reply #36 on:** November 19, 2010, 04:53:52 AM »

Here's an updated drilling pict,

After 75 years, it's still earning it's keep lol

DM

AWS · « **Reply #37 on:** March 07, 2011, 07:52:31 PM »

Finally got around to taking a picture.

Bernadelli 2000 Leupold VX-II 1x4x2mm 12ga over 5.6x50R Mag

AWS

dougk · « **Reply #38 on:** May 07, 2011, 11:18:08 AM »

Funk Drilling Made in 07/1935 in Suhl Germany. 16x16/8x72R

dougk · « **Reply #39 on:** July 06, 2011, 05:46:07 PM »

1926 Christph Funk Grade III drilling

16x16/9x57r weights 3.1 kilograms or 6.8 lbs

I am currently tring to figure out how to mount a scope on the bases.

dougk · « **Reply #40 on:** July 06, 2011, 05:46:56 PM »

the bases

GLShooter · « **Reply #41 on:** October 24, 2011, 01:38:49 PM »

This is the only one I own. 16X16 and an 8 MM tube on bottom.

Greg

dougk · « **Reply #42 on:** October 25, 2011, 03:57:05 PM »

Hey Greg
that is a very nice hammer drilling....

Please feel free to post pics of the proof marks under the forend. The proof marks tell alot about the gun.

Doug

GLShooter · « **Reply #43 on:** October 26, 2011, 08:43:29 AM »

Quote from: dougk on October 25, 2011, 03:57:05 PM

Hey Greg
that is a very nice hammer drilling....

Please feel free to post pics of the proof marks under the forend. The proof marks tell alot about the gun.

Doug

That is a great idea. Maybe someone can help me decipher them a bit more.

Greg

cbodnar · « **Reply #44 on:** November 10, 2011, 05:36:00 AM »

Here are some pictures of the Aug. Yung drilling currently in my care. It is a 16x16 over 7x57R. The discussion thread can be found here: http://www.gboreloaded.com/forums/index.php/topic,244328.0.html

Enjoy,
Cyril

sharps4590 · « **Reply #45 on:** February 13, 2013, 12:31:44 PM »

I haven't taken a lot of pictures of my drillings or combo guns, but here's a couple of my Meffert Dural frame in 16 X 16 over 7 X 57R

I have a Theime & Schlegelmilch on the Nimrod frame in 16 X 16 over 9.3 X 75R Nimrod but no pictures and the tube set is at NECG in New Hampshire for repair. I hope they get it finished in time for deer season 2013!

dougk · « **Reply #46 on:** February 14, 2013, 05:02:58 PM »

The Meffert are very nice guns. Do you have the proof date from the barrels?

Doug

sharps4590 · « **Reply #47 on:** February 15, 2013, 12:24:57 AM »

Doug, I believe it is 1936. I'm getting a bit cramped for time this morning or I'd go look. Hopefully this afternoon I can.

dougk · « **Reply #48 on:** February 15, 2013, 03:46:32 PM »

I have a 1943 field grade and a 1936 fancy Meffert drilling, both are 16x16/8x57JR. I really like the manual pop up front sight for use with the shot gun. I have only seen the pop up front sight on Meffert drillings

sharps4590 · « **Reply #49 on:** February 16, 2013, 03:57:00 AM »

A pop up front sight? If it's automatic upon selection of barrels that's a new one to me! If it's manual I've seen pictures of them. I've always admired German/Austrian firearms but only in the last year have I become serious to learn about them....and it has not been nice to the checking account!!!