Author Topic: 243 superlite , need starting point  (Read 457 times)

0 Members and 1 Guest are viewing this topic.

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
243 superlite , need starting point
« on: January 01, 2007, 06:01:50 AM »
Ok guys i have a 243 superlite barrel coming and need some load data to get started , i know these barrels can be picky about how they shoot .

I have some h-4895 , IMR 4895 and IMR 4350 for powder , also have 85 and 100 gr bullets , can get other powder and bullets as needed . any ideas will work no matter how far in left field they are .

I am planing to match it with a 218 Bee barrel for a combo varmnent rig to keep in the truck .

please help .  ???

stimpy
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 243 superlite , need starting point
« Reply #1 on: January 01, 2007, 06:27:50 AM »
Here's Howard NZ's load info, AR2217 is an equivilent to H1000 and most likely is the same powder since Hodgdon repacks a lot of ADI powders. Hodgdon shows H1000 in their 95gr and above 243 data. ;)

Tim

http://www.graybeardoutdoors.com/smf/index.php/topic,69409.msg424720.html#msg424720

http://www.adi-limited.com/handloaders-guide/equivalents.asp
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline safetysheriff

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1439
Re: 243 superlite , need starting point
« Reply #2 on: January 01, 2007, 07:37:47 AM »
i've been seeing how your .22-250 is going.   seems you are doing alright with that one.   good for you.

with a superlite barrel i'd stick to lightweight bullets.   that's because i'd expect less 'barrel whip' to be developed by the lighter bullets and because of what 'boots' obermeyer says about heavier bullets and heavier charges of slower powders causing barrel erosion.   the .243 is so overbore that i'd definitely follow his advice.    last summer my buddy's .243 in Model 700 BDL (blued) heated up so quickly from three shots with 100 gr' Sierra's that the barrel was too hot to touch!

i'd stick with 85 gr' bullets and lighter for everything out of the .243 through large whitetail/mule deer and caribou.     i'd use Rem' brass which usually is heavier, and i'd use one of your 4895 propellants with a CCI-200 (standard, large rifle primer) behind that bullet.   cci-200's should be good with any single-based, stick powder up through a 'speed' of approx' IMR's 4320.   

let us know how you do,

ss'   
Yet a little while and the wicked man shall be no more.   Though you mark his place he will not be there.   Ps. 37.

Offline Stan in SC

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 805
  • Gender: Male
Re: 243 superlite , need starting point
« Reply #3 on: January 01, 2007, 07:40:58 AM »
Point #1-They are finicky.Never expect accuracy from the first round.They like a dirty bore.
Point#2-Mine only liked 100 grain Remington green box.
Point#3-After trying for CONSISTENT accuracy for 5 years I sold mine.
Point#4-They are light,handy and a delight to carry in the woods.
Point#5-They just LOOK good.
Point#6-If you want a good scope and mounts see my ad in the NEF classifieds.

Stan
The more I listen,the more I hear....and vice versa.

45/70..it's almost a religion.

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: 243 superlite , need starting point
« Reply #4 on: January 01, 2007, 07:46:10 AM »
SS

This will be my first 243 and i was wondering about the heaver bullets , may get some Sierra 55s and 70s to try .
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline safetysheriff

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1439
Re: 243 superlite , need starting point
« Reply #5 on: January 01, 2007, 07:54:04 AM »
stimpy'

my buddy wanted a .243 in that Model 700....and couldn't take no for an answer.   so i put together some loads for him using H-414 and AA-xmr4350 with those 100 gr' Sierra boat tails before he got into reloading himself.   they were Extremely accurate....but extremely hot to the touch as well!   i told him he'd be eating that barrel up.   i bought him some 70 gr' Hornady spire points for Christmas for that Remington.   i did that because of what was said in 'boots' interview, and because they approximate the sectional density of the 60 gr' spire point that kills large whitetails so well out of a .223 and a .22-250.   

i hope you enjoy good shooting with that Handi'.

take care,

ss'   
Yet a little while and the wicked man shall be no more.   Though you mark his place he will not be there.   Ps. 37.