« previous next »
Pages: [1]   Go Down

Author Topic: 45-70 barrel on an HH Frame?  (Read 497 times)

0 Members and 1 Guest are viewing this topic.

Offline mattparliament

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 503
  • Gender: Male
45-70 barrel on an HH Frame?
« on: January 05, 2007, 07:27:58 AM »
Hey all, I know that this has been discussed before but I gotta ask.  Is a 45-70 barrel safe on a H&R frame with a "HH" prefix which designates a 1993 action?

Sorry for the simple question but I couldn't find what I wanted with the search.  Thanks guys.

Matt
Logged
Life is tough, it's tougher if you're stupid.  ~John Wayne

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43302
  • Gender: Male
Re: 45-70 barrel on an HH Frame?
« Reply #1 on: January 05, 2007, 07:41:02 AM »
The .45-70 isn't a high pressure caliber if going by H&R's standard and recommended levergun load level, but I think I'd stay away from Ruger data with the pre-'99 frames that weren't heat treated. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline mattparliament

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 503
  • Gender: Male
Re: 45-70 barrel on an HH Frame?
« Reply #2 on: January 10, 2007, 09:41:44 AM »
so, is it safe to say use this frame interchangably with a newer one IF one doesn't handload to ruger levels?
Logged
Life is tough, it's tougher if you're stupid.  ~John Wayne

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43302
  • Gender: Male
Re: 45-70 barrel on an HH Frame?
« Reply #3 on: January 10, 2007, 09:57:38 AM »
I'd say yes, H&R would fit a barrel to it since it was made after 1986 and their load recommendation for the 45-70 is levergun loads. Levergun loads, depending on who's data is used runs from 28kcup to 40kcup, Ruger data can be anywhere from 35kpsi to 50kcup, SAAMI says 28kpsi for any 45-70 due to the older firearms.

Tim

http://www.leverguns.com/articles/paco/4570_leverguns.htm
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline mattparliament

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 503
  • Gender: Male
Re: 45-70 barrel on an HH Frame?
« Reply #4 on: January 11, 2007, 08:27:17 AM »
Well, I've been loading some up to 40K, I'll just stick with it on the new frame then.  Thanks Quick.
Logged
Life is tough, it's tougher if you're stupid.  ~John Wayne
Pages: [1]   Go Up
« previous next »