Author Topic: Win sx2 problem  (Read 502 times)

0 Members and 1 Guest are viewing this topic.

Offline Countryboy

  • Trade Count: (8)
  • Avid Poster
  • **
  • Posts: 113
Win sx2 problem
« on: February 04, 2007, 05:31:42 AM »
I asked on the win. forum but got no replies. My super x 2 started throwing fire out of the side when the shell ejects. Anyone ever seen anything like this?

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Win sx2 problem
« Reply #1 on: February 04, 2007, 07:44:28 AM »
The SX2 is a self adjustiong gas operated weapon. While I've little experience with the SX2 these types of weapons sometimes exhibit accelerated bolt speeds if the gas bypass becomes clogged by carbon or fouling. The accelerated bolt speed causes the bolt to open before the pressure has dropped completely in the barrel. This can escape as a flash from the ejection port.  Also how much flash are you speaking of. A small amount of flash is not unknown..
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline mountainview

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 516
Re: Win sx2 problem
« Reply #2 on: February 04, 2007, 02:22:00 PM »
I've seen this when I've been shooting trap at dusk and under the lights with my reloads in my SX2. I reckon the low light makes it easier to observe this. My gun seems to function fine otherwise for me.

Offline Countryboy

  • Trade Count: (8)
  • Avid Poster
  • **
  • Posts: 113
Re: Win sx2 problem
« Reply #3 on: February 04, 2007, 05:01:28 PM »
These were factory loads during midday. The fireball was not normal. It was about the size of a basketball. Gunnut is the bypass the ports in the gas piston?

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Win sx2 problem
« Reply #4 on: February 05, 2007, 08:20:40 AM »
A fireball at midday is not a good thing!! As I said I've no real experience with the SX2 but have seen similar problems helped by a good cleaning.. Be sure to get the carbon out! I've included a diagram link below..

http://www.brownells.com/aspx/NS/schematics/schemmfg.aspx?schemid=353&m=17&mn=Winchester%c2%ae&model=Super+X+Model+2+

gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Countryboy

  • Trade Count: (8)
  • Avid Poster
  • **
  • Posts: 113
Re: Win sx2 problem
« Reply #5 on: February 05, 2007, 05:18:14 PM »
I'll give it a try and let you know. But not till the mercury rises.

Thank for the advice