Author Topic: Did a little stock swapping! (Read 1253 times)

quickdtoo · « **on:** January 22, 2007, 01:47:47 PM »

Taking a que from Mac and his XLR, I swapped the gray laminate stock off the .405 Winchester and put it on the SS .30-06, looks as good as I envisioned, a perfect match to the XLR cousin!! Put the TDC stock set on the .405 Winchester with Bushnell Trophy scope.

Tim

MSP Ret · « **Reply #1 on:** January 22, 2007, 01:50:20 PM »

They sure look good Quick, you have a eye for color, they look as if they grew that way!!!....<><....

McLernon · « **Reply #2 on:** January 22, 2007, 01:51:12 PM »

Looks sweet Quick

Mc

quickdtoo · « **Reply #3 on:** January 22, 2007, 01:53:07 PM »

Thanks, now if I can just make it to the range, was gonna go last Sunday, but it just happened to be the wife's B'day, so ya know how that went!!

This limited winter range time is sure a drag!!

Tim

gould · « **Reply #4 on:** January 22, 2007, 01:56:25 PM »

Quick if you could get them to sell the stainless with those stocks factory insted of the tupperware they would get a bost in sales right there. I like it just looks right.

McLernon · « **Reply #5 on:** January 22, 2007, 02:24:07 PM »

I agree the SS with the grey lam's looks super. My 45/70 Marlin XLR SS with grey lam's looks fantastic.

Maybe I should get a 45/70 nickel plated receiver with a SS 45/70 barrel. Is it available byr special order I wonder

Mc

Norseman112 · « **Reply #6 on:** January 22, 2007, 02:25:30 PM »

Pretty nice looking pair of handi rifles there Tim

John

O44 · « **Reply #7 on:** January 22, 2007, 02:30:46 PM »

I was wondering how the 06 shot before you swaped stocks?I am looking at one with synthetics on it.

holahead · « **Reply #8 on:** January 22, 2007, 02:34:38 PM »

I don't care who you are you got to like that right there now!

EVOC ONE · « **Reply #9 on:** January 22, 2007, 02:55:44 PM »

Very nice, Quick.

Spanky · « **Reply #10 on:** January 22, 2007, 03:38:11 PM »

There are more Handi's in that picture than there are in my local gun shop. I'm jealous!!

quickdtoo · « **Reply #11 on:** January 22, 2007, 03:52:45 PM »

I bought it from Kufford here, in the syn stocks he had acceptable accuracy after he got it back from H&R for a chamber problem, too little headspace IIRC, but barely as I recollect, 2"+. I never shot it that way, put a camo lam set on it, polished the bore and chamber and shot 150gr Fusion ammo with it, accuracy was just over 1" IIRC, velocity I remember well at just over 3000fps, The only syn stock set that I've had good luck with out of the box is on my .30-30, others I've had to play with hole position and O-rings to get to shoot good.

I don't know if y'all notices, but it also has polished steel spacer, trigger guard, hammer, trigger and barrel release, no black parts.

I don't think an SS .45-70 barrel is available, but ya never know, they supposedly never made 24" bull barreled Hornets either, but Shaner has one!!

Don't tell the ATF, spanky!!

Thx,

Tim

db22 · « **Reply #12 on:** January 22, 2007, 03:54:23 PM »

Quick -- Glad to see that I am not the only gun crank who stores rifles muzzle-down -- let the solvent drain out, instead of back against the stock. You have a couple of fine-lookin' rifles there!

Datil · « **Reply #13 on:** January 22, 2007, 04:02:12 PM »

Hi Tim Good looking bunch of NEF/H&R's you have there.
Good luck Marv.

tallyho · « **Reply #14 on:** January 22, 2007, 04:26:12 PM »

Quote from: quickdtoo on January 22, 2007, 01:47:47 PM

Taking a que from Mac and his XLR, I swapped the gray laminate stock off the .405 Winchester and put it on the SS .30-06, looks as good as I envisioned, a perfect match to the XLR cousin!! Put the TDC stock set on the .405 Winchester with Bushnell Trophy scope.

Tim

Quick, As usual, nice job!

Since Mac inspired you, then you inspired me to try something: I put my BC stocks on my son's Sportster, then put my Gray lams on my daughter's gun. My son still needs a youth stock, so the BC won't fit him for awhile yet (but it sure fits me nice!).

Whatever the BC's end up on for me will have a receiver sight, though as shown in the pic they ain't really too bad for using the scope.

p.s. I'm working on a page for the Handholic website for just Handi mods... hint hint!

quickdtoo · « **Reply #15 on:** January 22, 2007, 04:43:00 PM »

Lookin good, Kerry!!! I love this, musical Handi stocks!!!

Hmmmm, haven't done anything with the Sportsters.....yet!!! The only bad thing about swapping stocks around, is they need to be shot again, and with my poor memory, I won't remember which went where and when I shot it!!!

I've always stored my muzzleloaders muzzle down, but after finding a bunch of oil on the latches and learning that many accuracy complaints at H&R are solved by drying the latch, I started putting them all muzzle down, it's also easier on the Limbsaver recoil pads, they tend to deteriorate when on the floor under the weight of the rifle all the time.

Tim

quickdtoo · « **Reply #16 on:** January 22, 2007, 04:55:56 PM »

Quote from: tallyho on January 22, 2007, 04:26:12 PM

p.s. I'm working on a page for the Handholic website for just Handi mods... hint hint!

Hmmm, lots of stuff in the FAQs to share, I'm sure we can get you off to a good start!!

Tim

tallyho · « **Reply #17 on:** January 22, 2007, 05:28:35 PM »

Yup... but right now I'm thinkin' of your 405 and your 45-120...

I'll email ya about them later.

Maybe part of the page can be called "Musical Stocks".

quickdtoo · « **Reply #18 on:** January 22, 2007, 05:31:02 PM »

Oh, Ok, major mods! I gotcha!!

Tim

Mac11700 · « **Reply #19 on:** January 22, 2007, 07:22:16 PM »

Quote from: McLernon on January 22, 2007, 02:24:07 PM

I agree the SS with the grey lam's looks super. My 45/70 Marlin XLR SS with grey lam's looks fantastic.

Maybe I should get a 45/70 nickel plated receiver with a SS 45/70 barrel. Is it available byr special order I wonder

Mc

You could probably get it done...but I don't think NEF will have any like you want...

Quick...

Looking good...Glad I could inspire anyone these days

Mac

omcforever · « **Reply #20 on:** January 22, 2007, 11:18:59 PM »

IS SO NICE TO HAVE A 100 YARD AND 25 YARD RANGE BUILT IN MY BACK YARD TO INCLUDE BENCH SET IN CONCRETE AND 4X4'S!!! NO MORE PUBLIC RANGES AND THOSE BLAST AWAY ALL THE AMMO WE CAN IDIOTS AND I CAN SAVE ON GAS!!! (I CAN SHOOT DURING BIRTHDAY PARTIES ALSO). THE REAL PLUS IS 1 OF MY 3 DEER STANDS HAPPENS TO BE AT THE END OF THE 100 YARDER{SHOT 3 OVER THE PAST 3 YEARS PREPPING TO SIGHT IN GUNS!}

44 Man · « **Reply #21 on:** January 23, 2007, 01:00:39 AM »

Nice looking stocks, Quick. I'm picking up an older Topper in 30-30 in a few weeks. This one has an ugly blond stock on it but is only $125! I'll need to find some nicer wood to put on it, maybe a youth butt stock for my Grandson. Ain't all of this fun! 44 Man

joshco84 · « **Reply #22 on:** January 23, 2007, 03:39:28 AM »

if you dont like that blonde stock send me a pm. i really like the light colored ones.

MSP Ret · « **Reply #23 on:** January 23, 2007, 04:00:29 AM »

I already sent him a PM a while ago buddy, but depending on what design stock it is perhaps you (or even someone else) will get it if he does get rid of it to anyone here....<><....

Mac11700 · « **Reply #24 on:** January 23, 2007, 05:34:42 AM »

Quote from: MSP Ret on January 23, 2007, 04:00:29 AM

I already sent him a PM a while ago buddy, but depending on what design stock it is perhaps you (or even someone else) will get it if he does get rid of it to anyone here....<><....

I beat ya to it Andy...I was on the phone with him when he was bidding on it...and got in first dibbs...Quick has a way of finding those good deals..

Mac

MSP Ret · « **Reply #25 on:** January 23, 2007, 05:36:56 AM »

Good for you Mac!!! we are going to start calling you Quick2!!!....<><....

we are talking about those blond stocks of 44 Man right?....

motordog80 · « **Reply #26 on:** January 23, 2007, 05:40:20 AM »

looking good. I just finnished my walnut stock for my ss 22-250 and hopping to post a picture soon.