« previous next »
Pages: [1]   Go Down

Author Topic: multi barrels  (Read 831 times)

0 Members and 1 Guest are viewing this topic.

Offline rotor32

  • Trade Count: (0)
  • Posts: 2
multi barrels
« on: January 27, 2007, 08:10:07 AM »
I am thinking about getting a ultra varmit in 223. my question is I have been reading on here that if I buy it and later I want a differant caliber I can send ithe frame back to the factory and they can fit it with new barrel  does this mean I have two rifles or just a new caliber
thank you in advance  chris
Logged

Offline dw06

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1074
  • Gender: Male
Re: multi barrels
« Reply #1 on: January 27, 2007, 08:15:11 AM »
Welcome to GBO rotor32.That means you would have two barrels that fit youre frame,and could swich between the two.You can get more than one barrel fitted at a time also.
Logged
If you find yourself in a hole,the first thing to do is stop digging-Will Rogers

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: multi barrels
« Reply #2 on: January 27, 2007, 08:17:16 AM »
Welcome aboard rotor32, you keep your existing barrel home, send in your reciever and the factory fits a new barrel to your reciever and sends it back to you. From then on you can easily and quickley switch back and forth from one barrel to the other in less than a minute with just a philips screwdriver on one forearm screw. In essense two completely different calibers on one reciever(frame), in essence 2 different guns....<><.... :)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline rotor32

  • Trade Count: (0)
  • Posts: 2
Re: multi barrels
« Reply #3 on: January 27, 2007, 08:21:44 AM »
thanks for the help  "I think I am goin to like it here"
chris
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: multi barrels
« Reply #4 on: January 27, 2007, 08:40:13 AM »
It's a great place with great people Chris, they are always ready to offer an opinion ( ;D) or even help with the facts if neccessary. So pull up a stump and get warm by the fire, there is always room for one more....<><.... ;)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: multi barrels
« Reply #5 on: January 27, 2007, 08:48:46 AM »
Chris

I have one of my frames that i can go from 223 to 270 to 45/70 to 20ga. with just a twist of a wing nut , another frame will go from 218 Bee to 243 to 12ga. , depends on what i feel like shooting . also have some complete rifles that i do not switch barrels on .

stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline burntmuch

  • GBO Supporter
  • Trade Count: (114)
  • Senior Member
  • *****
  • Posts: 2177
Re: multi barrels
« Reply #6 on: January 27, 2007, 09:23:39 AM »
Be warned!! You ll never have enough
Logged
I dont care what gun Im using as long as Im hunting

Offline jpsmith1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 342
Re: multi barrels
« Reply #7 on: January 27, 2007, 10:09:07 AM »
I'm reading this with some interest.  I've been considering a Handi for a few weeks, now.  The rifles are cheap enough, but about what does it cost to set it up for a new barrel?  Can you buy/sell barrels aftermarket like for the T/C's, or are the reciever specific?
Logged
Searching for the perfect left handed revolver.....

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: multi barrels
« Reply #8 on: January 27, 2007, 10:21:30 AM »
Take a look at the NEF Classifieds and then read the barrel fitting info in the FAQs and Help sticky, they aren't one size fits all like the TC, but having multiple frames usually, but not always, a used barrel will work for ya, one way or another. ;) I have 27 complete rifles, at least a third of them have been bought from parts and put together myself.

New barrels fitted by the factory will cost $15 fitting and $10 return shipping, plus the barrel cost. There are some restrictions on fitting which can be seen at their web site.

Tim

http://hr1871.com/Support/accessoryProgram.aspx
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »