« previous next »
Pages: [1]   Go Down

Author Topic: 256 Maximum  (Read 1832 times)

0 Members and 1 Guest are viewing this topic.

Offline AlanF

  • Trade Count: (2)
  • Member
  • *
  • Posts: 83
256 Maximum
« on: November 24, 2006, 11:01:07 PM »
Are any of you guys shooting a 256 Maximum? If so, can you share some load info. Particulary interested in velocity with 87-100 grain bullets. What is its case capacity? Thinking of one on a Contender to compliment my Brown 97D in 256 Mag. Thanks guys.

Alan
Logged

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: 256 Maximum
« Reply #1 on: November 26, 2006, 02:41:02 PM »
Check out data for the 25-222 Copperhead. You should be mighty close to that one, and just a little short of a 257 TCU. It ought to make a pretty effective cartridge, and work great in the Contender.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline BigLost

  • Trade Count: (0)
  • Member
  • *
  • Posts: 56
  • Gender: Male
  • was I wrong?no,,,mistaken
Re: 256 Maximum
« Reply #2 on: August 04, 2007, 07:24:32 AM »
87 grn.--14 to 15.5 gr. 2400=1900fps to 2070fps,,,,17gr. to18 gr.IMR4227=1970fps to 2120fps,,,,17gr. to 18.5gr.IMR4198=1680fps to 1790fps.Hope this helps
Logged
If You Knew Me Like I Know Me,,You Wouldn't Like Me Either

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
Re: 256 Maximum
« Reply #3 on: August 06, 2007, 07:46:15 AM »
Actually the .256 Win. mag. is closer to the .221 Fire Ball case necked to .25 cal. than the .222 case necked up so the Copper Head data would be way to hot. I do shoot a .25-221 and the case is a hair larger than the .256 case. I got my data from an old Layman manual.It does not have data for anything heaver than an 86 gn. jacketed bullet or a 90 gn. cast. The max. velocity they give for the 86 gn. bullet through a 24 in. barrel is 2212 fps. It is a fun little round and not real loud.
Logged

Offline Reed1911

  • GBO Sponsor
  • Trade Count: (18)
  • Senior Member
  • *****
  • Posts: 1332
    • www.reedsammo.com
Re: 256 Maximum
« Reply #4 on: August 07, 2007, 09:05:54 AM »
It should be a pretty easy project to do, keep us posted on it, or at least keep me posted on it I've thought about it a few times over the years even got some cases made up for it. Annealed some 357MX cases and some 360DW cases and ran them into the 256WM dies when making 256WM cases just for Ideas.
Logged
Ron Reed
Reed's Ammunition & Research
info@reedsammo.com
www.reedsammo.com
Pages: [1]   Go Up
« previous next »