« previous next »
Pages: [1]   Go Down

Author Topic: Frame Source  (Read 638 times)

0 Members and 1 Guest are viewing this topic.

Offline Kywoodwrkr

  • Trade Count: (0)
  • Member
  • *
  • Posts: 79
Frame Source
« on: January 13, 2007, 07:56:26 AM »
Who are the better sources for 1911 frames?
Are  the ones from the KY manufacturer good?
Can't remember the name of the company.
Not looking for a competition frame just a good reliable shooter.
Also who is now selling component parts for the 1911 at reasonable prices-if anyone!
Thanks.
DaveP    kywoodwrkr
Logged
DaveP   Kywoodwrkr

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: Frame Source
« Reply #1 on: January 13, 2007, 11:41:23 AM »
Get it all at Brownells.

Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline rbwillnj

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 349
Re: Frame Source
« Reply #2 on: January 13, 2007, 05:29:41 PM »
Caspian
Logged

Offline williamlayton

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 15415
Re: Frame Source
« Reply #3 on: January 13, 2007, 11:35:21 PM »
There are some varied choices here.
STI and SVI will accomodate a frame.
Caspian is the best known.
NOW--here is one no one has considered.
There are a number of folks who deal in OLD guns that offer frames and slides-on occasion.
Collectors firearms, here in Houston do this and they have more than one at thier place now.
You can find theme at the site by the same name--collectors firearms--by a name search.
From my reading, there is a number of folks that offer them. Be careful---all frames and slides are NOT equal.
Blessings
Logged
TEXAS, by GOD

Offline 1911crazy

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4793
  • Gender: Male
Re: Frame Source
« Reply #4 on: January 23, 2007, 08:19:44 AM »
I purchased a new 1911a1 slide kit from SPG along with the lower frame parts too.  I'm ready to get a new frame soon too.  I'm not sure which one yet too.  I know i could of purchased another new lower price 1911a1 but i wanted to do one 1911a1 build from the bottom up.  Its either a Caspian or the place in VT who manufactures frames too.
Logged

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: Frame Source
« Reply #5 on: January 23, 2007, 01:53:11 PM »
Essex Arms??  Mikey.
Logged

Offline 1911crazy

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4793
  • Gender: Male
Re: Frame Source
« Reply #6 on: February 07, 2007, 01:29:52 PM »
Yes Mikey thats it ESSEX!!!!  I may go that route to keep the cost down. Its my first build and maybe my shooter/beater 1911a1 who knows how it will turn out.  I have barrel and bushing down now i just need the frame assembly and fitting experience. And how to fit the slide to the frame too.  I will learn how to do this no matter how many parts i ruin(just kidding).  I'm sure i'll be ok. ::)
Logged
Pages: [1]   Go Up
« previous next »