« previous next »
Pages: [1]   Go Down

Author Topic: Sizing 45 Colt brass  (Read 313 times)

0 Members and 2 Guests are viewing this topic.

Offline charlesr

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Sizing 45 Colt brass
« on: February 10, 2007, 11:10:30 AM »
I have just full length sized some Star and Winchester 45 Colt brass using an RCBS carbide die.  Sized brass will not slip easily into the chamber on my Ruger Blackhawk.  I've never had this problem with my 357 or 44 Mag S&W revolvers.  What's my problem.

Charles
Logged
Charles

Offline Tom W.

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1294
  • Gender: Male
  • Warning... Does not play well with others!
Re: Sizing 45 Colt brass
« Reply #1 on: February 11, 2007, 06:36:43 AM »
Sounds like maybe your die is mis-adjusted.
Logged
Tom
Alabama Hunter and firearms safety instructor

I really like my handguns!

Offline charlesr

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Re: Sizing 45 Colt brass
« Reply #2 on: February 11, 2007, 09:30:16 AM »
I solved my problem.  I was rotating the cylinder to far and the case was binding on the loading gate.
Logged
Charles

Offline Tom W.

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1294
  • Gender: Male
  • Warning... Does not play well with others!
Re: Sizing 45 Colt brass
« Reply #3 on: February 11, 2007, 03:01:25 PM »
I bet you feel better now!
Logged
Tom
Alabama Hunter and firearms safety instructor

I really like my handguns!
Pages: [1]   Go Up
« previous next »