« previous next »
Pages: [1]   Go Down

Author Topic: Triggers...  (Read 479 times)

0 Members and 1 Guest are viewing this topic.

Offline Echo4Lima

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 363
Triggers...
« on: February 18, 2007, 08:37:01 AM »
My .450M has a stiff trigger, whos replacement is the best, easiest to install, and economical? I can make do with out the econimical, I'd rather have a nice light, smooth trigger pull.
Logged

Offline ScoutMan

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
Re: Triggers...
« Reply #1 on: February 18, 2007, 10:37:56 AM »
Look at the "Happy Trigger" from Wild West Guns.

http://www.wildwestguns.com/Accessories/accessories.html
Logged
If you can get closer, get closer
If you can get steadier, get steadier.

A telescope helps you see; it does not help you hold and squeeze.-Jeff Cooper

Offline Winter Hawk

  • Trade Count: (47)
  • Senior Member
  • *****
  • Posts: 1947
  • Gender: Male
Re: Triggers...
« Reply #2 on: February 19, 2007, 03:59:37 AM »
You might also consider polishing the seer and full cock notch with a very fine stone.  Be very carefull to keep the mating surfaces at the same angle with relation to each other.  You are only trying to smooth them so they slip past each other easier.  When you look at them, there may be a manufacturing burr making things rough which needs to be removed.  If you feel uncomfortable doing this, talk to a gunsmith.  He might do it for a lot cheaper than buying a custom trigger!

-WH-
Logged
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone

Offline Echo4Lima

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 363
Re: Triggers...
« Reply #3 on: February 20, 2007, 08:33:11 AM »
Thanks Gents!!
Logged
Pages: [1]   Go Up
« previous next »