« previous next »
Pages: [1]   Go Down

Author Topic: Uberti Trigger  (Read 445 times)

0 Members and 1 Guest are viewing this topic.

Offline Sandy Ridge

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Uberti Trigger
« on: February 20, 2007, 02:37:23 PM »
I have a 45/70 1885 and the trigger was always pretty stiff.  I would like to take it apart and smooth and lighten the trigger.  I've heard they are a bugger to get back together.  Does anyone have any experience with these.  I would really like to find a double set trigger for the gun.  Any response is welcome.  Thanks Guys
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Uberti Trigger
« Reply #1 on: February 21, 2007, 07:53:03 AM »
I'll include a link to a parts diagram for a Winchester 1885 which should be very similar. The '85's are not to difficult to tear down the copy Browning made called a B78 was the bear.. It has an extractor made to jump into the groove of a rimless case and they require more than the three hands a gunsmith normally has, to reassemble..  Good luck. You might check with Uberti for a set trigger..

http://stevespages.com/ipb-winchester-1885.html
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Sandy Ridge

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: Uberti Trigger
« Reply #2 on: February 21, 2007, 10:11:54 AM »
gunnut69,  Thanks for the reply.  I think I will try it.  I have sent Uberti several emails with no response.  Somewhat disappointed in them.  Thanks again,  S. R.
Logged
Pages: [1]   Go Up
« previous next »