« previous next »
Pages: [1]   Go Down

Author Topic: 223 Twist Rate  (Read 678 times)

0 Members and 1 Guest are viewing this topic.

Offline dalv

  • Trade Count: (0)
  • Member
  • *
  • Posts: 60
  • Gender: Male
223 Twist Rate
« on: February 22, 2007, 10:35:57 AM »
Can someone tell me the twist on the .223? 
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
223 Twist Rate
« Reply #1 on: February 22, 2007, 10:37:37 AM »
Most likely 1:12", but 1:9" barrels have been made too. The only way to know for sure is check it, info on how can be found in the FAQs. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline pfettig

  • Trade Count: (0)
  • Member
  • *
  • Posts: 54
Re: 223 Twist Rate
« Reply #2 on: February 22, 2007, 10:55:28 AM »
I just tested my '06 .223 ultra varmint and it's a 1/12.  I've heard it doesn't seem to make much of a difference (1/9 or 1/12) with H&R because the 1/9 still won't shoot the heavy bullets very well.
Logged

Offline greyling

  • Trade Count: (1)
  • Member
  • *
  • Posts: 96
Re: 223 Twist Rate
« Reply #3 on: February 22, 2007, 12:02:35 PM »
what is considered a heavy bullet in 223? something over 50 grn?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 223 Twist Rate
« Reply #4 on: February 22, 2007, 12:12:09 PM »
68gr is the heaviest I've seen reported to shoot decent in the 1:9" H&R/NEF, typically, 63gr/64gr is tops, with 60gr or lighter being the best choice of the heavier bullets. Both twist rates shoot the 40gr-55gr excellent for the most part.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline dalv

  • Trade Count: (0)
  • Member
  • *
  • Posts: 60
  • Gender: Male
Re: 223 Twist Rate
« Reply #5 on: February 22, 2007, 03:21:53 PM »
Thanks Quick!  I have some 68 gr Black Hills I tried in my Tikka today but the 1:12 throws them all over.  Unlike the 50-55 gr it's a tackdriver. 

My thought is to pick up a H&R 1:9 and put on my 22 mag receiver SB1 so I can shoot the heavier lead.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 223 Twist Rate
« Reply #6 on: February 22, 2007, 04:15:56 PM »
As I posted to your classified question, you can't put a centerfire barrel on a rimfire frame for anything more than looks, the firing pin won't hit the primer, so it won't work. ???

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline dalv

  • Trade Count: (0)
  • Member
  • *
  • Posts: 60
  • Gender: Male
Re: 223 Twist Rate
« Reply #7 on: February 22, 2007, 04:40:12 PM »
Yep!  Should have realized that - getting tired I guess.  Might hafta grab a new one in 223!  Thanks
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 223 Twist Rate
« Reply #8 on: February 22, 2007, 04:53:26 PM »
There ya go, then you can get some more barrels, you're not limited to just rimfires!! :D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
Re: 223 Twist Rate
« Reply #9 on: February 23, 2007, 03:29:10 AM »
My 1 in 9" 223 heavy shot 64g O K. 1.5 to 2" groups.
It will shoot 45g hollow points inside an inch though.
Works just fine for me.
I use it for coyotes all year and then sight in for heavy bullets for two weeks as my backup deer rifle.
Logged

Offline mookster79

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 109
  • Gender: Male
Re: 223 Twist Rate
« Reply #10 on: February 23, 2007, 06:28:12 AM »
Everything that is stated here. I have a '06 handi .223 and have never bothered to check the twist on my own.  It is a tack driver with rounds from 45gr. to 55gr.  I never tried anything heavier becuase I never needed to.  I had the shop I bought it ask the rep at H&R and they told him either 1:9 or 1:12. I think the only way to tell is to do the rod test.  Goodluck with everything.
Logged
TJM
Pages: [1]   Go Up
« previous next »