« previous next »
Pages: [1]   Go Down

Author Topic: THE 2007 Interantional Open - suggestions of designs  (Read 953 times)

0 Members and 1 Guest are viewing this topic.

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
THE 2007 Interantional Open - suggestions of designs
« on: February 24, 2007, 02:54:43 AM »
I've heard from some folks considering two designs that have not yet been posted.

In addition there is one piece of 1-1/4" stainless here that is just begging to become a handgonne!
Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Re: THE 2007 Interantional Open - suggestions of designs
« Reply #1 on: February 27, 2007, 04:22:18 PM »
Here are a couple of musings from a year or so ago.

This is from 1-1/4" stainless and is in 20ga (0.625" bore diameter).  Hand held until I get around to putting on a tiller.



This is in 10ga (about .77 caliber) with a 12ga pumkin ball next to it.


Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: THE 2007 Interantional Open - suggestions of designs
« Reply #2 on: February 27, 2007, 05:16:58 PM »
Here is a design that could be used for the handgonne sized piece:



Click the image for a dimensioned drawing.  You could even make it a little fatter around the chamber and stay within the material.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: THE 2007 Interantional Open - suggestions of designs
« Reply #3 on: February 28, 2007, 06:47:44 AM »
Well just steal my Idea what don't you!!!


drawn with P&P ver. 2.75

Tim what do you have in the way of weldable  1.25 diameter by 2.25 inch long and .5 x 2 inch.  They gotta be weldable to each other

Logged

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Re: THE 2007 Interantional Open - suggestions of designs
« Reply #4 on: February 28, 2007, 07:01:51 AM »
If you look at the base of the little mortar a few posts prior - they are silver soldered together.

Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)
Pages: [1]   Go Up
« previous next »