« previous next »
Pages: [1]   Go Down

Author Topic: 1911a1 problem  (Read 663 times)

0 Members and 1 Guest are viewing this topic.

Offline glockbox

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
1911a1 problem
« on: January 19, 2007, 08:36:44 AM »
I'm in the process of building a 1911a1 pistol. The problem I have is that the hammer wont fall when I pull the trigger. It will fall if, while squeezing the trigger I cock the hammer just a little bit, then it will fall. I think I have a hammer/sear engagement problem. Any suggestions of what I should do would be greatly appreciated. ???
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: 1911a1 problem
« Reply #1 on: January 19, 2007, 09:37:53 AM »
Does your trigger have an over travel adjustment stop?
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline glockbox

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
Re: 1911a1 problem
« Reply #2 on: January 22, 2007, 02:59:15 PM »
No. it has a standard style trigger.
Logged

Offline glockbox

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
Re: 1911a1 problem
« Reply #3 on: January 22, 2007, 03:03:10 PM »
Problem solved! The disconnector was sticking in the down position because it was hanging up against the sear spring. A little polishing on the disconnector and the sear spring and I'm back in business. ;D
Logged

Offline EXGM1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Re: 1911a1 problem
« Reply #4 on: March 01, 2007, 01:50:51 PM »
Your awesome! :o
Logged
Pages: [1]   Go Up
« previous next »