« previous next »
Pages: [1]   Go Down

Author Topic: Stainless Encore with Walnut Stock  (Read 1660 times)

0 Members and 1 Guest are viewing this topic.

Offline Walk

  • Trade Count: (8)
  • Member
  • *
  • Posts: 73
  • Gender: Male
Stainless Encore with Walnut Stock
« on: February 25, 2007, 07:32:19 AM »
I was wondering if anyone has this setup.  I am thinking of getting a walnut stock for my Encore and wanted to know what it would look like.  Any pictures would be great! ;D
Logged

Offline azmike

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 244
  • Gender: Male
Re: Stainless Encore with Walnut Stock
« Reply #1 on: February 25, 2007, 09:01:23 AM »
Don't have it, but I saw one once.  It was a Muzzleloader on gunbroker, and looked really good. 

My next G2 carbine will be SS/walnut.  Just can't decide on which calber   ::).  I'd go with a .338JDJ, but my cheap side says get a 45-70 instead.
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: Stainless Encore with Walnut Stock
« Reply #2 on: February 25, 2007, 10:38:14 AM »
I took my flex tech stock off my Pro-hunter M/L and put a walnut thumbhole stock on it. It looks great.  My buddy also has his stainless with a walnut stock. They look real good. I don't have any pic's though.
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
Re: Stainless Encore with Walnut Stock
« Reply #3 on: February 26, 2007, 12:08:08 PM »
I like the looks of them even though I do not have a pure walnut and stainless.  I do however have two that are walnut with a stainless frame and a blue barrel.  I am old fashioned, so I think that anything looks good with walnut as opposed to that new fangled plastic stuff.
Logged

Offline BLUESBERRY

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 123
Re: Stainless Encore with Walnut Stock
« Reply #4 on: February 27, 2007, 11:47:12 AM »
I had one, wooden stock and stainless barrel and frame,,, I thought it looked great, thats why i bought it,,,It shot great also,,,    Bruce... ::)
Logged

Offline Walk

  • Trade Count: (8)
  • Member
  • *
  • Posts: 73
  • Gender: Male
Re: Stainless Encore with Walnut Stock
« Reply #5 on: March 02, 2007, 06:32:41 AM »
How about a PHOTO ::)
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: Stainless Encore with Walnut Stock
« Reply #6 on: March 02, 2007, 07:17:55 AM »
Send my your e-mail address and I will send you a few pic's of my Encore with the Walnut Stock.
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Johnny Reb

  • Trade Count: (0)
  • Member
  • *
  • Posts: 96
Re: Stainless Encore with Walnut Stock
« Reply #7 on: March 02, 2007, 08:16:22 AM »
I traded my laminated stock, which looked good, for a walnut stock, which looks GREAT!!
Logged
Proud member of the vast right wing conspiracy

Not fooled by the liberal media

Offline BrianM

  • Trade Count: (3)
  • Member
  • *
  • Posts: 89
Re: Stainless Encore with Walnut Stock
« Reply #8 on: March 02, 2007, 08:28:10 AM »
Here's a picture of mine , along with a deer .
Logged

Offline AiredaleTerrier

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 114
Re: Stainless Encore with Walnut Stock
« Reply #9 on: March 03, 2007, 05:19:36 AM »
Don't know why T/C doesn't offer the Encore this way.  I think it is the best looking combination by far!  You'll have to piece your gun together if this is what you want.
Logged
Handis:  357Mag, 7.62x39, 25-06, 308, 17m2, 20ga...

Offline Walk

  • Trade Count: (8)
  • Member
  • *
  • Posts: 73
  • Gender: Male
Re: Stainless Encore with Walnut Stock
« Reply #10 on: March 03, 2007, 05:34:56 AM »
Thanks for the photos Redhawk1 and BrianM  ;) It looks better than I thought :o :o.  Now I will must find a stock set.
Logged

Offline BrianM

  • Trade Count: (3)
  • Member
  • *
  • Posts: 89
Re: Stainless Encore with Walnut Stock
« Reply #11 on: March 03, 2007, 09:29:50 AM »
I bought mine that way and I know another guy that has one exactly like mine that was bought that way . I was told that T/C does make a few of them this way but they don't catalog them . Might want to give T/C a call and ask them .
  I sure do like the looks of Stainless and walnut together !
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: Stainless Encore with Walnut Stock
« Reply #12 on: March 03, 2007, 12:23:25 PM »
My buddy bought one Stainless with walnut stock & forearm.  So they do sell them like that.
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline AiredaleTerrier

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 114
Re: Stainless Encore with Walnut Stock
« Reply #13 on: March 03, 2007, 06:14:39 PM »
What a bummer.  Wish I would have known before I gave up searching for one.  Seems like I looked everywhere, then looked again.  Looked several years actually.  Of course this was before I knew about GBO.  This site is priceless.  I think a lot of the opinions and experiences you read about on here are better than what you would get out of a magazine on the same subject.  Sorry to get sidetracked...do you guys remember where these stainless walnut guns were purchased?  I'm assuming they were new also.  What caliber were they?  I would have to guess that there are many more that think the ss/walnut guns are really sharp also.
Logged
Handis:  357Mag, 7.62x39, 25-06, 308, 17m2, 20ga...

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: Stainless Encore with Walnut Stock
« Reply #14 on: March 04, 2007, 01:32:33 AM »
AiredaleTerrier, most of them are sold in 50 cal Muzzleloader's. I have seen a lot of them here in Delaware. Also you can ask the dealer to order one in the configuration you want. My buddy's Encore stock looks like something on a show gun. He was there to pick up a synthetic stock Encore and I told him to look at the walnut stock on the one he ended up getting.  I think it is the nicest stock I have seen on an Encore.
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Walk

  • Trade Count: (8)
  • Member
  • *
  • Posts: 73
  • Gender: Male
Re: Stainless Encore with Walnut Stock
« Reply #15 on: March 04, 2007, 03:36:44 PM »
I did come across one and some others at TCARMS.COM under Special Models ::)
Logged

Offline BrianM

  • Trade Count: (3)
  • Member
  • *
  • Posts: 89
Re: Stainless Encore with Walnut Stock
« Reply #16 on: March 05, 2007, 03:16:47 PM »
I bought mine new as a 50 caliber muzzleloader a long time ago .
Logged
Pages: [1]   Go Up
« previous next »