Author Topic: LBT Mould, 359 180 SIL (Read 551 times)

Rubi · « **on:** May 16, 2003, 10:34:09 AM »

I have the above mould in a four cavity. Can you tell me what mould handle (MAKER) will fit.
Many Thanks,

RUBI

Paul H · « **Reply #1 on:** May 16, 2003, 12:10:37 PM »

You can use either an RCBS, or a Lee handle. I've used both those handles, and they work equally well, though the Lee is 1/2 the cost of the RCBS.

Lvl1trauma · « **Reply #2 on:** May 16, 2003, 05:25:10 PM »

Lee mold handles will fit just about anything if you can grind down the width or maybe redrill the holes to make them larger. I have learned an expensive lesson with this as I have needlessly bought several more expensive pairs of handles. They are pretty good quality also. They are about $12 vs $27 or so compared to RCBS, Lyman, etc. I like the Lee handles better than a set of RCBS that I have. The hinge screw on the RCBS keeps trying to come out. Hope this helps.

Beau

Rubi · « **Reply #3 on:** May 16, 2003, 08:23:16 PM »

Thanks Paul H and Beau for your replies.

RUBI