Author Topic: short mag encores  (Read 570 times)

0 Members and 2 Guests are viewing this topic.

Offline rimfiresniper

  • Trade Count: (3)
  • Member
  • *
  • Posts: 47
short mag encores
« on: March 04, 2008, 07:03:05 PM »
i was looking around at MGM and i saw 233 wssm and 300 wsm. i always heard that an encore couldnt handle them so whats the deal?

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: short mag encores
« Reply #1 on: March 05, 2008, 01:21:22 AM »
I've also heard the short magnums aren't safe in the Encore.  I won't be buying one.

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26941
  • Gender: Male
Re: short mag encores
« Reply #2 on: March 05, 2008, 01:48:16 AM »
For some reason some folks seem to think it OK to chamber them and a few have been. I think many of those were recalled for one reason or another however. Both TC and JD Jones of SSK Industries thinks it unsafe. For me at least that would be a powerful reason to not have one. You can get equal performance from other rounds that are safe so why push your luck?  ???


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline southernutah

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 560
Re: short mag encores
« Reply #3 on: March 05, 2008, 06:48:27 AM »
I understand MGM WSM barrels have a longggggggggggggggg throat to let the bullet  get moving . I had a Bullberry in 300 WSM but showed signs of pressure way below max loading.  Had it cut and rechambered to 308.

Offline Lone Star

  • Reformed Gunwriter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2359
  • Gender: Male
Re: short mag encores
« Reply #4 on: March 05, 2008, 12:55:09 PM »
Quote
I had a Bullberry in 300 WSM but showed signs of pressure way below max loading.  Had it cut and rechambered to 308.
You had the breech end of the barrel cut off, the lug re-welded back on, then had it re-chambered?  ???


.

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: short mag encores
« Reply #5 on: March 05, 2008, 01:44:28 PM »
You can get equal performance from other rounds that are safe so why push your luck?  ???

Kenny Jarret of Jarret Rifles fame gave a seminar at the recent Safari Club International convention in Reno.  He made the points that the supposed benefits of the short magnums was the ability to use a shorter rifle action.  When you use a short action the bullet has to be seated so far into the case that case volume is essentially decreased negating the supposed ability to equal the performance for longer conventional cartridges.

Of course in an Encore, the barrel can be chambered so that the bullets can be seated way out but the question of safety is still there.  I'm also surprised that MGM is supposedly still chambering Encore barrels for these rounds.  I had thought they chambered some initially and then quit doing it.  Also, since J. D. Jones was heavily involved in the initial development of the Encore, if he doesn't think they're safe, I wouldn't presume to have a barrel made for one of them.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: short mag encores
« Reply #6 on: March 05, 2008, 02:02:09 PM »
Here's what Fred at Bullberry has to say about short mags and Encores.

Tim

http://www.bullberry.com/message.html
"Always do right, this will gratify some and astonish the rest" -  Mark Twain