Author Topic: Barrel Lenght/Velocity?  (Read 492 times)

0 Members and 1 Guest are viewing this topic.

Offline Joben

  • Trade Count: (0)
  • Posts: 2
  • Gender: Male
Barrel Lenght/Velocity?
« on: April 06, 2007, 07:09:17 AM »
Hi folks,

I just became interested in black powder, and know very little about it.

I notice that many of the traditional designs have very long barrels by modern standards.
Is there a performance difference between for example a rifle with a 24" barrel and one in the same caliber with a 32" barrel?

Offline hummer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 75
  • Gender: Male
Re: Barrel Lenght/Velocity?
« Reply #1 on: April 06, 2007, 09:38:07 AM »
Here is a site that will answer most of your questions.................
Good luck

http://www.three-peaks.net/muzzle.htm

http://www.thebuckskinner.com/barrel_chart.html
Tomorrow is another day!

Offline flintlock

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1405
  • Gender: Male
Re: Barrel Lenght/Velocity?
« Reply #2 on: April 06, 2007, 03:33:56 PM »
If you are talking what is "historically" correct, many flintlocks had 38-46 inch length barrels...I have 2 flinters, one a 1770 era and one a 1820 style, the earlier one has a 38 inch barrel, the later a 42 inch barrel...During that time frame most muskets also had a longer barrel, in the case of a musket its just as likely that they were that long because of the use of a bayonet, it gave you more reach...In a rifle's case the longer barrel gives you a longer sight radius, which should make you more accurate...But if you look at the German Jaeger rifles made, most of them were shorter than the typical American Longrifle...
Some as short as 24 inches or so, since the Germans started rifling wheelocks and matchlocks in the mid 1500s, I expect they knew they were losing some velocity, but remember with a heavy .54-62 caliber ball, you don't need the high velocity that we strive for today in modern cartridges...Whether you have, say 1600fps at the muzzle or 1500fps really does not matter in shooting a lead ball of that size...And with open sights in a hunting situation, 100-150 yards is about as well as most guys can shoot anyway, so flat trajectory isn't as important.

Velocity gained could be part of it, the powder we have now is certainly better than what they had especially during the American Revolution...But I feel that much of it is style, like the octagon barrels.

Offline crow_feather

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
Re: Barrel Lenght/Velocity?
« Reply #3 on: April 06, 2007, 09:29:18 PM »
If one reads the Lyman black powder manual, one can find not only the difference of velocity in barrel length, but also the difference in velocity with powder selection.  It's a good book to take a study on and you really don't need to get the updates.

C F
IF THE WORLD DISARMED, WE WOULD BE SPEAKING THE LANGUAGE USED BY THE AGGRESSIVE ALIENS THAT LIVE ON THE THIRD MOON OF JUPITOR.