« previous next »
Pages: [1]   Go Down

Author Topic: Berger VLD  (Read 1129 times)

0 Members and 1 Guest are viewing this topic.

Offline DannoBoone

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 321
  • Gender: Male
Berger VLD
« on: February 04, 2007, 09:06:17 AM »
Has anyone shot these? I ordered a box of 115gr VLD's and the ad said the were for a 1:10
twist, which my Encore barrel has. Upon arrival, the box was printed "At LEAST 1:10 twist
barrels". Went to the Berger website, which stated that they MAY need a 1:9 twist barrel.
They do look more like missiles than bullets.  :)  I am thinking they should be pushed
pretty fast to get proper rotation in the 1:10 twist barrel. Has anyone here
played with any VLD bullets?
Logged
We need to change our politicians
like we do dirty diapers.............
for the same reason.

Offline nomosendero

  • Moderator
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5760
  • Gender: Male
Re: Berger VLD
« Reply #1 on: February 04, 2007, 06:05:11 PM »
I use 125Gr.ULD Wildcats in 25-06AI, & they shoot great, but I am pushing them at 3,250fps. I don't see which cartridge you are shooting, but if 25-06 & at least a 24" tube & hopefully a 26" tube, I believe they will be fine IF you push them to a good vel. & seat close to the lands, these type
bullets prefer that.
Logged
You will not make peace with the Bluecoats, you are free to go.

Offline DannoBoone

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 321
  • Gender: Male
Re: Berger VLD
« Reply #2 on: February 06, 2007, 12:11:35 PM »
Thanks, guy. Yes, it is a .25-06 with a 26" barrel........an Encore barrel. I have to wildcat .270 cases
for it because it was reamed too deep and there is a .003" gap between barrel & receiver. A .25-06
case won't work at all. Had planned to bump them @ 3100+ fps with Reloader 22. I'm assuming
your AI is also 1:10?
Logged
We need to change our politicians
like we do dirty diapers.............
for the same reason.

Offline nomosendero

  • Moderator
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5760
  • Gender: Male
Re: Berger VLD
« Reply #3 on: February 06, 2007, 04:16:48 PM »
Yes, it is 1-10. You should get good results unless your barrel just doesn't like these bullets, & we know that can happen at any bullet weight.
Logged
You will not make peace with the Bluecoats, you are free to go.

Offline samuel

  • Trade Count: (1)
  • Member
  • *
  • Posts: 6
Re: Berger VLD
« Reply #4 on: April 01, 2007, 06:49:36 AM »
Anyone use these in a .257AI? I just received my encore barrel and am looking to start load development w/the115 vlds.

Thanks
Logged

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Berger VLD
« Reply #5 on: April 03, 2007, 06:53:23 PM »
When the bullet is flying it doesn't know how fast it is going, it only knows how fast it is spinning, so RPM is everything.  Faster velocity = higher RPM, so a slow twist barrel will make a long bullet stable if you get to a high enough velocity.  I had a 1 in 17 twist 22-250 barrel that was excellent, it would stabalize 55 gr bullets out to about 150 yards, 40 gr bullets worked perfect at 4,400fps out to 300 yards plus.  Any stablity factory over 1.0 is good.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.
Pages: [1]   Go Up
« previous next »