« previous next »
Pages: [1]   Go Down

Author Topic: look what I found...anyone interested?  (Read 1003 times)

0 Members and 1 Guest are viewing this topic.

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
look what I found...anyone interested?
« on: April 05, 2007, 08:53:00 AM »
I found this while doing my usual searches if anyone is interested:

http://www.ktpguns.com/interior.php/pid/28/gid/110764

....<><.... :)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Cookiemann

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1749
  • Apple Valley, MN
Re: look what I found...anyone interested?
« Reply #1 on: April 05, 2007, 10:44:54 AM »
Interesting combo...Wonder if the 20", 20ga barrel is FULL choke???  That sounds kind of rare with the 30-30 barrel also being nickle.   Just don't have the $$$ right now or I would be all over that.  New enough to get barrels fitted, too.

Thanks

cookiemann
Logged
NOT ON MY WATCH

"AIM small...MISS small"

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
Re: look what I found...anyone interested?
« Reply #2 on: April 05, 2007, 10:55:24 AM »

 I don't think it is new enough to get another barrel fitted, It is NB,
 I think it needs to be NN  99 model Marv.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: look what I found...anyone interested?
« Reply #3 on: April 05, 2007, 12:49:03 PM »
NN or HN is only required for high pressure * marked barrels, any frame made since 1987 can be fitted with other barrels, that would be NB which is 1987, dunno if they include that year or not, I read it as 1987 and later. A call to them would be in order to determine if it qualifiies.

Tim

Quote
Additional barrels may be added to firearms of our manufacture since 1987 only, with a serial number that begins with N or H. We do not install additional barrels on any other manufacturer’s firearms.

http://hr1871.com/Support/accessoryProgram.aspx
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Cookiemann

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1749
  • Apple Valley, MN
Re: look what I found...anyone interested?
« Reply #4 on: April 05, 2007, 02:44:35 PM »
I always thought it was inclusive of 1987.  Seems like a neet set.  Unfortunately, no $$$$ :'(.

cookiemann
Logged
NOT ON MY WATCH

"AIM small...MISS small"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: look what I found...anyone interested?
« Reply #5 on: April 05, 2007, 02:52:13 PM »
They also say any frame that starts with an N or H works, but I bet there's a cut off serial number they go by, that's why a call is advised. ;) The N or H prefix started in 1986, the year the original H&R went out of business, so maybe even some NA or HA frames qualify, as long as they were made by the current H&R......I think!! ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bang_off

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 130
Re: look what I found...anyone interested?
« Reply #6 on: April 07, 2007, 02:03:16 PM »
Logged
Australia

Offline shaner

  • GBO Supporter
  • Trade Count: (66)
  • Senior Member
  • *****
  • Posts: 2057
  • Gender: Male
Re: look what I found...anyone interested?
« Reply #7 on: April 08, 2007, 03:30:55 AM »
geeeez  for that money why worry bout  adding barrels makes a great combo, and  yu get another complete rifle?????? just my thoughts on it ,
Logged
Pages: [1]   Go Up
« previous next »