« previous next »
Pages: [1]   Go Down

Author Topic: limbsaver on handi 45-70  (Read 1313 times)

0 Members and 1 Guest are viewing this topic.

Offline Frank O

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
limbsaver on handi 45-70
« on: April 04, 2007, 10:30:07 AM »
Have any of you put a limbsaver recoil pad on a handi rifle?  Was wanting to get one for my newly acquired 45-70.  If so, do any of the pre-fit ones fit the handi-rifle or do I need to get the grind-to-fit model?
Logged

Offline vinpar092

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #1 on: April 04, 2007, 01:52:56 PM »
I think limbsaver #10003 is for the handi. A local gunsmith has mine waiting for me tomorrow. The number could be 10103. I'll let you know tomorrow.
vince
Logged

Offline cowboyup453

  • GBO Supporter
  • Trade Count: (82)
  • A Real Regular
  • *****
  • Posts: 685
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #2 on: April 04, 2007, 01:54:12 PM »
There are quite a few here that have them. I have a small grind to fit for mine but I havent had time to fit it yet. The only prefit one is for the Ultra Slug hunter.
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #3 on: April 04, 2007, 02:03:40 PM »
there are quite a few different buttstock dimensions in the field on these Handis, It is best to try yours and to either trace or very carefully measure your individual buttstock before trying to purchase a recoil pad. Just because it says H&R or NEF does not mean it will fit perfectly. A recoil pad or buttplate from one Handi stock may or may not fit another Handi stock without fitting....<><....  :)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #4 on: April 04, 2007, 02:41:16 PM »
The 10601 and 10003 will fit some stocks so-so, but not perfect, you'll need to drill new holes in the butt stock to match the pad holes. The small grind-to-fit will work on any wood stock, but don't plan on finding one to match the synthetic stocks unless it's the slip on.  :'(

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline wtroger

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 343
Re: limbsaver on handi 45-70
« Reply #5 on: April 04, 2007, 04:53:07 PM »
I put one on my 45/70 and it helped a bunch. I still has as a lot of push but it took the sharp bite out of it. I called limbsaver and gave them my butt stock dimensions and they recommended I think a medium grind to fit. I could use one hole had to drill  one for the other I have not ground mine yet my or may not. it hangs over a little but not much.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #6 on: April 04, 2007, 05:00:47 PM »
The medium grind-to-fit might work, but the small definitely does, I've done several of them. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Frank O

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: limbsaver on handi 45-70
« Reply #7 on: April 05, 2007, 05:06:56 AM »
Thanks for the help.  I think I will order the small grind to fit.
Logged

Offline vinpar092

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #8 on: April 05, 2007, 09:32:33 AM »
The 10102 limbsaver pad for 870, 1187 and marlin 336 in 444/450 will fit the monte carlo synthetic really close. To line the holes, I'm going to epoxy in a peice of oak to the inside bottom of the stock. The top screw hole matches.
vince
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #9 on: April 05, 2007, 09:46:57 AM »
Great idea, Vince!!

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline boommer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 62
Re: limbsaver on handi 45-70
« Reply #10 on: April 05, 2007, 05:44:27 PM »
just finished my BC today small grind to fit limbsaver still at small there is meat that comes off of it. came out nice but really don't like the looks of it on the rifle I think maybe I will look around for a thinner pad even thou she will be a little short on the trigger pull now! any help out there on a pad maybe 1/2 inch thickness I think it would look a little nicer and still tame it wasn't that bad with black loads so any help THANKS!
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #11 on: April 05, 2007, 07:50:04 PM »
Brownell's or Midway have lots of pads to choose from, you can get different thicknesses, materials and colors, just use their search box for recoil pad. ;)

I have a small grind to fit on a .45-70 Carbine, treated with Slick Eez pad treatment so it's not sticky.

Tim


www.brownells.com

www.midwayusa.com
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline James B

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 944
Re: limbsaver on handi 45-70
« Reply #12 on: April 07, 2007, 05:57:52 PM »
They are not pretty but if you want to take the bite out at the range, check out the Shooters Friend recoil pad at Cabelas. Just type it Shooter Friend recoil pad. This fits the Handi and you wont believe how good thiis ugly little pad works. Puts every pad I ever tried to shame. They claim 70 percent reduction in felt
 recoil. they are right. About 18.00










Logged
shot placement is everything.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: limbsaver on handi 45-70
« Reply #13 on: April 07, 2007, 06:28:13 PM »
$20 worth of UUUUUGLY!! :D

Tim

Ugly Pad
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline James B

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 944
Re: limbsaver on handi 45-70
« Reply #14 on: April 09, 2007, 06:09:39 AM »
But man does it work. I enjoy shooting again even with my bad shoulder. If you have no shoulder  issues or enjoy being pounded with a chunk of hardwood then this may not be for you. ;D
Logged
shot placement is everything.
Pages: [1]   Go Up
« previous next »