« previous next »
Pages: [1]   Go Down

Author Topic: Barrel lug welding?  (Read 565 times)

0 Members and 1 Guest are viewing this topic.

Offline eskimo36

  • Trade Count: (156)
  • Senior Member
  • *****
  • Posts: 1359
  • Gender: Male
    • Adventure Rider
Barrel lug welding?
« on: April 15, 2007, 11:05:51 AM »
What method is used by H&R/NEF to weld the barrel lugs?
Logged
"one shot is usually enough"

Offline 300winny

  • Trade Count: (0)
  • Member
  • *
  • Posts: 37
Re: Barrel lug welding?
« Reply #1 on: April 15, 2007, 02:50:59 PM »
looks like the MIG welding process to me and the welds look a little cold which could be the reason they break off frequently, Im a certified welder also just so you dont think im just talking out of my arse
Logged

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Barrel lug welding?
« Reply #2 on: April 15, 2007, 04:36:38 PM »
What ever they use gets the barrel hot enough to make hard and soft spots in the metal.  While boring the barrel of the 410 for the stub project I did I could feel the hard and soft places with the lathe.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline JPH45

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1145
Re: Barrel lug welding?
« Reply #3 on: April 15, 2007, 04:44:37 PM »
They use a spot welding process, that's why it looks cold, and also why it creates hard spots, they don't stress relieve the barrels after.
Logged
Boycott Natchez Shooters Supplies, Inc

Offline Busta

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2586
  • Gender: Male
Re: Barrel lug welding?
« Reply #4 on: April 15, 2007, 05:18:17 PM »
 The barrel/receiver lug is MIG welded, the barrel/forend lug is SPOT (resistance) welded. Done both for many years, not firearms but for the auto industry.
Logged
U.S.A.F. Veteran
NRA Life Member

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel lug welding?
« Reply #5 on: April 15, 2007, 05:37:40 PM »
As John and Busta said, the forend stud is just spot welded on with 4 spot welds, it doesn't take much to knock it off!!

Tim

http://www.gboreloaded.com/forums/index.php/topic,96568.msg1098240921.html#msg1098240921
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »