« previous next »
Pages: [1]   Go Down

Author Topic: M77 MK-II Triggers.  (Read 1463 times)

0 Members and 1 Guest are viewing this topic.

Offline KENTDEP

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
M77 MK-II Triggers.
« on: March 25, 2007, 03:18:58 AM »
So what are you guys thoughts on replacement triggers for the 77 MK-II? I have one that is kinda mushy and I would like to get it replaced.

Which are your favorites and why? I am not looking for a bench rest trigger. Just a nice hunting trigger 3-4 pounds that snaps like a glass rod. I have looked at the Timney, Dayton Traister and Spec-Tech. Not sure which on to get.
 
Thanks for the help.

Jay
Logged

Offline daddywpb

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1136
Re: M77 MK-II Triggers.
« Reply #1 on: March 25, 2007, 04:14:14 AM »
I replaced the triggers in both of my M77's with Rifle Basix triggers. They are excellent and an easy drop in installation. No fitting required. They are easily adjustable from ounces to a couple pounds without removing the action from the stock.
Logged

Offline Coyote Hunter

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2534
Re: M77 MK-II Triggers.
« Reply #2 on: March 25, 2007, 04:25:15 AM »
I always try tuning them up first.  Haven't had to replace one yet.  A Dremel and some fine Cratex (polishing) wheels does wonders.
Logged
Coyote Hunter
NRA, GOA, DAD - and I VOTE!

Offline KENTDEP

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: M77 MK-II Triggers.
« Reply #3 on: March 25, 2007, 06:55:27 AM »
Thanks guys. I have tried to clean up the trigger but there isn't much to do about over travel.

Jay
Logged

Offline Cement Man

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1265
  • Gender: Male
Re: M77 MK-II Triggers.
« Reply #4 on: March 25, 2007, 07:43:15 AM »
I have only used Timneys so I cannot comment on any others, although I am sure there are other excellent units.  I really like them and I think they give an excellent pull.   They are easy to install and I like the ability to adjust if I want to. 
Logged
CIVES ARMA FERANT - Let the citizens bear arms.
POLITICIANS SHOULD BE LIMITED TO TWO TERMS - ONE IN OFFICE AND ONE IN PRISON.... Illinois already does this.

Offline Luckyducker

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 645
Re: M77 MK-II Triggers.
« Reply #5 on: March 25, 2007, 03:05:58 PM »
Don't waste your time and money on the Dayton-Traister trigger.  I installed one in a MKII and wouldn't have wasted my money on it if I had known what it was beforehand.  I sold the rifle to my S-I-L and he replaced the D-T with a Timney, now that is a custom trigger.
Logged

Offline KENTDEP

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: M77 MK-II Triggers.
« Reply #6 on: March 26, 2007, 03:38:02 AM »
Luckyducker,

What didn't you like about the Dayton Traister? Just curious.

Jay
Logged

Offline KENTDEP

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: M77 MK-II Triggers.
« Reply #7 on: March 26, 2007, 01:45:06 PM »
Here is a picture of the rifle in question-


Along side it's little .22 Magnum budy.

Jay
Logged

Offline safetysheriff

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1439
Re: M77 MK-II Triggers.
« Reply #8 on: March 29, 2007, 12:58:01 PM »
Quote from: KENTDEP on March 25, 2007, 06:55:27 AM
Thanks guys. I have tried to clean up the trigger but there isn't much to do about over travel.

Jay

www.centerfirecentral.com/77trigger.html should get you to the site that gives you verbage and a drawing to gain an understanding of how to tune a Model 77 Mk II. HOWEVER: working on sear engagement can be VERY risky.   i recommend the use of a trigger pull-weight gauge and reasonable acceptance of 'some' creep in a sporting rifles trigger.   it's all part of being safe.

i hope this helps.   

you should be able to access the trigger page directly.   if not just go to centerfirecentral.com and tell them you 'agree' and then go to the gunsmithing section.

take care with this project,

ss' 
Logged
Yet a little while and the wicked man shall be no more.   Though you mark his place he will not be there.   Ps. 37.

Offline Hairtrigger

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 2010
Re: M77 MK-II Triggers.
« Reply #9 on: March 29, 2007, 03:33:29 PM »
I spent some time online last week looking for help with the new LC6 trigger but found nothing.
Logged

Offline gt40

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
Re: M77 MK-II Triggers.
« Reply #10 on: July 07, 2007, 04:59:36 AM »
Hairtrigger,

If you find out anything please post it here or e-mail me and I'll do the same for you.

"Aim small miss small",  ;D

gt40
Logged

Offline Hairtrigger

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 2010
Re: M77 MK-II Triggers.
« Reply #11 on: July 08, 2007, 07:21:52 AM »
The LC6 triggers are very simular
Logged
Pages: [1]   Go Up
« previous next »