Author Topic: Need to Purify Wheel Weight Lead  (Read 1202 times)

0 Members and 1 Guest are viewing this topic.

Offline Dan Chamberlain

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 406
Need to Purify Wheel Weight Lead
« on: April 14, 2007, 05:06:46 AM »
I have a need to cast some "purer" conicals than straight wheel weight lead.  Other than heating the lead and continuing to skim the dross repeatedly, is there something that can be added to the mixture that will help separate the non-lead components? 

Dan

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18247
Re: Need to Purify Wheel Weight Lead
« Reply #1 on: April 14, 2007, 07:08:49 AM »
nope and you can skim to the cows come home and wont remove any appreciable ammounts of tin or antimony. About your only hope for softer bullets with that alloy is to aneal them. Heat them in an oven for a couple hours at 450 and let them cool slowly at room temp. It should make them somewhat softer. But given time they will eventualy return to there normal hardness.
blue lives matter

Offline masek77

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 109
Re: Need to Purify Wheel Weight Lead
« Reply #2 on: April 14, 2007, 07:11:33 AM »
Hehe I was just about to say ask Lloyd Smale. I guess he beat me to the post...lol

If there is a good way to separate out the metals in wheel weight, linotype and other "alloy" leads, Im sure the cost would far outweight the benefits. You would be better off buying pure lead on ebay or somewhere like that...

Offline FLNT4EVR

  • GBO Supporter
  • Trade Count: (8)
  • A Real Regular
  • *****
  • Posts: 603
  • Gender: Male
Re: Need to Purify Wheel Weight Lead
« Reply #3 on: April 14, 2007, 12:14:54 PM »
If you need pure lead  any plumbing supply shop should have all you want.
" Act civilized...even if you ain't " 
 
" I won't be wronged. I won't be insulted. I won't be laid a hand on. I don't do these things to other people , and I require the same from them. "
                                  John Wayne, "The Shootist"

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18247
Re: Need to Purify Wheel Weight Lead
« Reply #4 on: April 14, 2007, 11:07:47 PM »
ask at your local phone and power company. Im a lineman and sometimes we will pull old cable out of the ground that is incased in lead. Its about pure. Also ask at your local plumbing shop as they sometimes pull it out too.
blue lives matter

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18247
Re: Need to Purify Wheel Weight Lead
« Reply #5 on: April 14, 2007, 11:08:36 PM »
if your bored and have time seperate all the stick on wws out of your stash as there pretty much pure lead
blue lives matter

Offline Dan Chamberlain

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 406
Re: Need to Purify Wheel Weight Lead
« Reply #6 on: April 15, 2007, 02:53:49 AM »
Thanks all, for the comments. 

Dan

Offline Black Jaque Janaviac

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1027
Re: Need to Purify Wheel Weight Lead
« Reply #7 on: April 26, 2007, 05:00:12 AM »
a caution on the stick-on WWs.  Some are pure lead, others are zinc.  They're fairly easy to distinguish.  The pure lead can be easily twisted by hand, the zinc are much harder and sometimes have the letters "zn" on them.
Black Jaque Janaviac - Dat's who!

Hawken - the gun that made the west wild!

Offline dubber123

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 435
Re: Need to Purify Wheel Weight Lead
« Reply #8 on: April 26, 2007, 11:35:53 AM »
Another thing I noticed about the zinc stick on weights is they sound alot different when dropped on a concrete floor.  The regular soft lead ones "thud", the zinc ones have a "clink" to them.