« previous next »
Pages: [1]   Go Down

Author Topic: .38 S&W  (Read 535 times)

0 Members and 2 Guests are viewing this topic.

Offline tony212

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 280
.38 S&W
« on: April 02, 2007, 01:50:47 PM »
Anybody have any load data for .38 S&W?  I have a police positive that I have been working up loads for.  So far I have had pretty good luck with 4.7 grains Unique under a Speer 125 grain JSP.  I have also been trying a 158 grain cast swc over 2.4 grains of Red Dot. I was wondering if anyone else has any experience with .38 S&W. 
Thanks
Tony212
Logged

Offline tony212

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 280
Re: .38 S&W
« Reply #1 on: April 17, 2007, 12:29:10 PM »
Don't know if anyone is interested but I tried a new load today,
2.8 grians of Unique
CCI 500 primer
158 swc
  Still to much snow to get to the range and properly test and chronograph, but they seemed to shoot pretty well.  I didn't know if anyone else loads for/shoots a .38 S&W (.38 Colt New Police, .380/200)
Tony212
Logged

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
Re: .38 S&W
« Reply #2 on: April 17, 2007, 04:49:00 PM »
2.5 to 3 grs. of Bullseye should shoot as good as anything you find under a 158 gr. bullet.
Logged

Offline S.S.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2840
Re: .38 S&W
« Reply #3 on: April 20, 2007, 02:59:20 AM »
I have only been able to find lead bullets of the proper diameter,'
Does someone make a jacketed bullet for the .38 S&W ?
My Enfield doesn't shoot .357 diameter worth a crap..
It needs a .360-.361..
Logged
Vir prudens non contra ventum mingit
"A wise man does not pee against the wind".

Offline iiranger

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 491
Old, old, Re: .38 S&W
« Reply #4 on: April 20, 2007, 09:26:26 AM »
MOst of the load data companies have data. Low demand. You have to ask.  It is not meant to be strong. Dates from days of black powder. Light loads by today's standards. You can buy custom bullets from swage.com directory. Web site belongs to Corbin and lists bullet makers that use Corbin equipment. They will make anything you will pay for, but not cheap. Easier and more authentic to go with lead bullets. A few moulds still around to cast that large. And at normal pressures, about any alloy should be o.k. (if it casts). luck.
Logged

Offline tony212

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 280
Re: .38 S&W
« Reply #5 on: April 20, 2007, 01:06:48 PM »
I guess I've been kinda lucky, mine has been shooting both the .357 125 jsp and the .358 cast LSWC pretty well.  What I always worry about is how much pressure I'm generating. Granted the police positive is much stronger than the old break tops but it is still a pretty old gun. It was made between 1917 and 1922 depending on who's website you look it up on.
Tony212
Logged

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: .38 S&W
« Reply #6 on: April 20, 2007, 02:25:21 PM »
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: .38 S&W
« Reply #7 on: April 20, 2007, 02:29:32 PM »
This one is a little better.

http://www.reloadammo.com/38sw.htm

Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline tony212

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 280
Re: .38 S&W
« Reply #8 on: May 28, 2007, 02:20:59 PM »
OK, today I tried Remington 125 JSP, 4.5 grains of Unique, and a CCI 500 primer.  The accuracy was excellent, and the velocity through my Shooting Chrony averaged 996 FPS.   I think this is the load I'm going to stay with. It actually makes the .38 S&W a worthwild cartridge.
Tony212
Logged
Pages: [1]   Go Up
« previous next »