« previous next »
Pages: [1]   Go Down

Author Topic: Monte Carlo stocks with receiver sights  (Read 510 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave Weiss

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 222
  • Gender: Male
Monte Carlo stocks with receiver sights
« on: May 15, 2007, 11:23:13 PM »
I've got a straight stock, straight grip camo laminate stock (exactly what I thought I wanted) on my 45-70 now and it's "wailin the tar" out of me. I'm thinking about going with the laminated Monte Carlo style. I sighted down one today and I think it will work... I'd just like some experienced advise, before I spend any more $, thanks.

>>>===> Dave
Logged
Hunt hard, shoot fast and trust your dog.

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #1 on: May 16, 2007, 01:40:02 AM »
Dave

I have the same stocks on my 45/70 ( except in RED ) and i don't notice any diffrence between them and the Monticarlo set that was on it . What part is " wailin the tar out of you " ? Is it just the recoil itself or the way the stocks fit you ?

stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline Dave Weiss

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 222
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #2 on: May 16, 2007, 07:35:39 AM »
Stimpy, I think it's the small butt pad area and the way the stock fits. The recoil isn't intolerable. It seemed to me that the monte carlo style had a larger butt pad area and with my head higher it would make it more comfortable, I just wasn't sure if I'd be able to get my head low enough to use the receiver sights. I've only found one Handi rifle up here with that style stock, but it was at Walmart and they have trigger locks on their guns so I wasn't able to cock it and look down the top of the barrel. I think I was able to get lined up, hard to tell.

>>>===> Dave
Logged
Hunt hard, shoot fast and trust your dog.

Offline cowboyup453

  • GBO Supporter
  • Trade Count: (82)
  • A Real Regular
  • *****
  • Posts: 685
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #3 on: May 16, 2007, 08:14:26 AM »
I tried the reciever site on monte carlo stocks and could not my head low enough to line up the sights. Hope this helps.
Logged

Offline Dave Weiss

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 222
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #4 on: May 16, 2007, 08:42:06 AM »
cowboy thanks, that helps a lot, I was worried about that. I really think I need to quit messin' with this gun and just shoot it... Thanks guys.

>>>===> Dave
Logged
Hunt hard, shoot fast and trust your dog.

Offline Dave Weiss

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 222
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #5 on: May 30, 2007, 05:24:10 PM »
Follow up,
 I bought a straight stock pistol grip from Gunstocks Inc. with a Decelerator pad @ 14.5 LOP, HUGE difference. I've got the stock shaped up nicely, two more coats of oil and I'm ready to go.
My good friend and hunting partner rough shaped the stock for me and fitted the stock to the receiver (shaped and glass bedded). I got it sanded down to it's final shape and figure, nice work if I do say so myself and I'm applying a Tung oil finish. I'm REALLY happy with the way this is turning out.
Unfortunately, while he was chiseling and rasping on my new stock (I thought it only needed a little work, I couldn't watch, kinda like when you get a hair cut, you only want to see the end result) I was perusing his work bench, sitting there, minding it's own business, was a jar of Pyrodex. I was checkin' it out and Denny asks me if I've ever loaded it. I say "no" and he says "it occurs to me that these Handi rifles are the perfect gun for Pyrodex/Black powder cartridges, take it home and try it". I did, I doubt that I'll ever shoot smokeless again. Shot clean through a dead cottonwood (36" diameter) with a 420gr HCFN, mild recoil, crack not a boom and wait for the smoke to clear so you can see if you hit sumthin. I like it.

>>>===> Dave
 
Logged
Hunt hard, shoot fast and trust your dog.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #6 on: May 30, 2007, 05:40:23 PM »
The problem with BP substitutes is they cost as much as smokeless, and you have to use more of it for less velocity, not very cost effective. There was a time that I could get Goex for $6 a lb, those days are over unfortunately. :-\ Enjoy it while you can!! ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Dave Weiss

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 222
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #7 on: May 30, 2007, 06:12:36 PM »
Tim, up here I can get Pyrodex for $16.95 a pound, Hodgdon 4198 or 4895 is$26.95 a pound. Regardless of price, Pyrodex is FUN. I'm gonna do a penetration test on a dead cottonwood, Smokeless vs. smokey. I"ll post pics this weekend (range report Alaska style). I kinda hope the tree stands long enough to complete the test, if not, that's even better  ;).

>>>===> Dave
Logged
Hunt hard, shoot fast and trust your dog.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #8 on: May 30, 2007, 06:42:51 PM »
That's what pyro and T7 are here, within a dollar or two of the price for smokeless which is $17-$20.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline pagris

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 130
Re: Monte Carlo stocks with receiver sights
« Reply #9 on: May 31, 2007, 07:44:23 AM »
Dave Weiss:  Quickdtoo's posting in the FAQs about receiver sights has a photo of a Handi with a Monte Carlo stock and a Williams WGRS peep sight.  Perhaps Tim could comment on how well it works with the Monte Carlo stock?

http://www.gboreloaded.com/forums//index.php/topic,64605.0.html
Logged
Thanks, Dad, for taking me into the great outdoors.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Monte Carlo stocks with receiver sights
« Reply #10 on: May 31, 2007, 08:23:37 AM »
I shot this group with that 45-70 just like it is, 28gr 2400 and the 350gr Hornady RN at 100yds. I made a sight adjustment after shot #2, the corrected it to #4. Point of aim is 6 O'clock in the white. ;) That laminated pallet wood stock has a bit lower comb by about 3/8" or so, than most monte stocks, it came on my 204 Ruger Handi.

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »