« previous next »
Pages: [1]   Go Down

Author Topic: Sights for a Sharps  (Read 788 times)

0 Members and 1 Guest are viewing this topic.

Offline gunbuster

  • Trade Count: (4)
  • Member
  • *
  • Posts: 50
Sights for a Sharps
« on: May 30, 2007, 01:23:02 PM »
New Pedersoli 45-70, 32 inch. barrel.             How far can I get out to with a three inch staff rear sight?   Do I need the four inch staff for 1000 yards?  Been looking at the sights at Cabela's.  Just don't know which to get.      Help please.
Logged
If you can't stand the pain, don't play the game.

Offline sharps4590

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 388
Re: Sights for a Sharps
« Reply #1 on: May 30, 2007, 01:44:43 PM »
You should be able to reach 1000 yards with the 3 inch staff, depending on the wind.  Only a strong headwind will prevent enough sight elevation.  I have an MVA rear sight with a 4 in. staff and there's quite a bit of staff above the rear aperature at 1000 yard setting.  My MVA is not of the Soule variety and I run out of windage long before I run out of elevation.  Consequently I installed an MVA front sight that is windage adjustable.  While it corrects the problem it adds another element to sighting.

Vic
Logged
NRA Patron, 2006
NRA Endowment, 1996
NRA Life, 1988
NAHC Life, 1985
There is no right way to do a wrong thing

Offline gunbuster

  • Trade Count: (4)
  • Member
  • *
  • Posts: 50
Re: Sights for a Sharps
« Reply #2 on: May 31, 2007, 10:19:11 AM »
Thank You
Logged
If you can't stand the pain, don't play the game.

Offline HEAD0001

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 176
Re: Sights for a Sharps
« Reply #3 on: June 01, 2007, 08:54:41 PM »
   Do you mean the tang sight.  I have that setup on my Pedersoli.  Mine will not get 1000 yards.  Not even close.  You can change the front sight, which will help, but I still doubt if you will reach 1000 yards.  I shoot chunk rock with mine at 425 yards.  I use 3/4 of the sight bar to get 425 yards. 

The V-notch rear sight is calibrated for 1000 yards.  But it is not three inches long.  Tom.
Logged
Tom Chase  Passed away at his home on Wed Nov 23

RIP Tom.

Offline iowa

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: Sights for a Sharps
« Reply #4 on: June 06, 2007, 08:02:08 AM »
gunbuster:  The 3" staff you are talking about is at best a mid-range sight which may get you to 600 yds.   If there is any chance you are ,in the future, going to shoot long range, 800 to 1000 yds., I'd strongly recommend you purchase the long range sight   best regards  Iowa
Logged
Pages: [1]   Go Up
« previous next »