« previous next »
Pages: [1]   Go Down

Author Topic: 204 Accuracy?  (Read 741 times)

0 Members and 1 Guest are viewing this topic.

Offline houser52

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
204 Accuracy?
« on: June 18, 2007, 10:12:32 AM »
Hello everyone.

I've been thinking of getting a 204 Ruger barrel for my NEF Ultra.  I'd like to hear from all you guys who have the 204 barrel and what kind of accuracy you get out of it. What's your best load?
The 204 sounds like a great round for groundhogs.

Thanks
Logged

Offline McLernon

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1217
Re: 204 Accuracy?
« Reply #1 on: June 18, 2007, 02:07:15 PM »
Right now I am getting 2MOA. But I have not bedded the forearm yet.

Mc
Logged

Offline Fred M

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2362
    • Fred The Reloader and Wildcatter
Re: 204 Accuracy?
« Reply #2 on: June 18, 2007, 04:21:48 PM »
Mc.
I feel aweful to put you on to this rifle. I have my doubts about that rifle.
Have it made into a 6x47 or 6x220 Swift. Or just simply sell it. Don't broadcast how bad it shoots. :'(
Logged
Fred M.
From Alberta Canada.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 204 Accuracy?
« Reply #3 on: June 18, 2007, 04:59:46 PM »
I'm shooting Mitchell's 204 Ruger load, 40gr Vmax and BL-C2, shoots sub moa for me, not as good as his did so so far, but I'm still workin on it!! ;D Mine doesn't shoot any factory ammo this well, but it does much better than 2MOA, 1¼" to 1½" is the best it did with factory, but I got lots of brass from trying it!!

Tim

http://www.gboreloaded.com/forums/index.php/topic,58956.msg353582.html#msg353582

http://www.gboreloaded.com/forums/index.php/topic,61304.msg369549.html#msg369549

http://www.gboreloaded.com/forums/index.php/topic,79053.msg488957.html#msg488957
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline jwv

  • Trade Count: (2)
  • Member
  • *
  • Posts: 90
Re: 204 Accuracy?
« Reply #4 on: June 18, 2007, 05:49:22 PM »
houser52 :  I have had my Ruger .204 about 5 months it is just the regular HB and wood stock. I have  put a little over 100 rounds thru it and they have all been factory 32 grain and I still am gettig 1/2" TO 3/4" groups.Thats not saying that it would be the best for you as there are some who get the best accuracy with the 40 grain. I know that QUICKDTOO has a .204 and it is a real good shooter to. You mentioned that you would be using it on groundhogs and if you read back a few pages read what DALESCARPENTARY had to say about his .204 he done good with his. I think you would like one to as there is no recoil.
          One thing I have seen is that it is still a fairly new round that seems to be accepted by most varmint hunters. Check this link out http://www.gunblast.com/Ruger204.htm  and this link http://www.204ruger.com/     Good luck and good hunting.      Jack
 
Logged
ObamaCare-----When injustice becomes law resistance becomes duty.     Thomas Jefferson

Offline DalesCarpentry

  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 6111
  • Gender: Male
  • I would rather be shooting!!
Re: 204 Accuracy?
« Reply #5 on: June 18, 2007, 08:03:34 PM »
I am real happy with the way my 204 has been shooting. I have killed many ground hogs this season that were way out there. I had an issue this past week when I missed a couple at 125 yards or so and could not figure out how I could have missed at such a close distance. This past weekend I took it to the range and found my problem. It was 2 inches left and an 1 inch high a 100 yards. This gun rides in the back of my truck in a hard case with my tools. I am thinking it just got knocked out of wack from that. Or I at least hope that is what happened. Today I missed another at about 200 yards. So off to the range again. I need to find out if I have a scope problem. It maybe having a problem holding zero. It is a Bushnell Banner 6x24x40. Next time I go to the range and if it is out then I know I have a scope problem. I have not looked into the warranty I have on it yet but if it is a good one it will be sent back. You will love the 204 it really is a great round. I just think I have other issues with it right now.
Logged
The quality of a mans life is in direct proportion to his commitment to excellence.

A bad day at the range is better than a good day at work!!

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: 204 Accuracy?
« Reply #6 on: June 19, 2007, 01:03:58 AM »
"So off to the range again. I need to find out if I have a scope problem. It maybe having a problem holding zero. It is a Bushnell Banner 6x24x40."

I have two of those scopes. The only problem I have had with mine was when I fell off the top of a gravel pit with one of them(too long of a story for here). The rifle was dropped and zero went about 2 feet to the right, the side I dropped it on. Both of them seem to be holding zero other than that. I am going to do a little experimenting with them to see how well they hold zero after turning the power up and down and adjusting the AO. I am doing this because my point of impact is changing to the right about 1/2" from one bench session to the next on one of them. This is with field work and just setting around in between. This one sets by the back door and do not know if the door opening and shutting is rattling the scope enough to shift the impact. Twice now it has shifted 1/2". I do run the power up and down. I turn it up to 24X for bench work and then turn it back down to 8X - 12X for field work. Of course the AO is being cranked on all of the time. from 100 yds at the bench to 50 yds, back to 200 yds for the field stuff. If the weather holds, I am going to this tomorrow with one of them. The other one is not at home right now.
Logged
Great men have vision and resolve to make dreams come true.

Offline DalesCarpentry

  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 6111
  • Gender: Male
  • I would rather be shooting!!
Re: 204 Accuracy?
« Reply #7 on: June 19, 2007, 03:05:33 AM »
Quote from: LaOtto222 on June 19, 2007, 01:03:58 AM
"So off to the range again. I need to find out if I have a scope problem. It maybe having a problem holding zero. It is a Bushnell Banner 6x24x40."

I have two of those scopes. The only problem I have had with mine was when I fell off the top of a gravel pit with one of them(too long of a story for here). The rifle was dropped and zero went about 2 feet to the right, the side I dropped it on. Both of them seem to be holding zero other than that. I am going to do a little experimenting with them to see how well they hold zero after turning the power up and down and adjusting the AO. I am doing this because my point of impact is changing to the right about 1/2" from one bench session to the next on one of them. This is with field work and just setting around in between. This one sets by the back door and do not know if the door opening and shutting is rattling the scope enough to shift the impact. Twice now it has shifted 1/2". I do run the power up and down. I turn it up to 24X for bench work and then turn it back down to 8X - 12X for field work. Of course the AO is being cranked on all of the time. from 100 yds at the bench to 50 yds, back to 200 yds for the field stuff. If the weather holds, I am going to this tomorrow with one of them. The other one is not at home right now.
Let me know what you find out. I to switch between powers often and change the ao often also. Thanks Dale.
Logged
The quality of a mans life is in direct proportion to his commitment to excellence.

A bad day at the range is better than a good day at work!!

Offline MnMike

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 493
Re: 204 Accuracy?
« Reply #8 on: June 19, 2007, 05:35:24 PM »
My .204 was boring. The first load I tried gave me a group that was more or less a single hole. I like playing with loads to get the best group. I guess I should be happy, but I wish I had to work a little harder. I used Varget which is not a speed champ in this caliber, but it worked.

good luck,

mike
Logged
Mike Ellestad

Offline DalesCarpentry

  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 6111
  • Gender: Male
  • I would rather be shooting!!
Re: 204 Accuracy?
« Reply #9 on: June 19, 2007, 06:59:12 PM »
Quote from: MnMike on June 19, 2007, 05:35:24 PM
My .204 was boring. The first load I tried gave me a group that was more or less a single hole. I like playing with loads to get the best group. I guess I should be happy, but I wish I had to work a little harder. I used Varget which is not a speed champ in this caliber, but it worked.

good luck,

mike
Hey good for you!!!!!! We should all have those problems. Next time "if ever" I hit the Loto I am going to wish I had not hit it so soon because I was having to much fun playing.
Logged
The quality of a mans life is in direct proportion to his commitment to excellence.

A bad day at the range is better than a good day at work!!

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
Re: 204 Accuracy?
« Reply #10 on: June 19, 2007, 07:09:21 PM »
The 204 I had, in which was short lived in my cabinet, was a most excellent shooter. I was able to get 1/4" groups when I did my part, as I do with my 223 Ultra. Only reason I got rid of it was I have too much reloading supplies for my 223 to warrant pursuing a 204.
The 204 is a very nice little cartridge and is very explosive. If you are interested in this caliber, I say go ahead and give her a try and pick up a box of V-Max's. Once you got her dialed in you will be happy with the destructiveness of this little cartridge.



-Aaron
Logged
Pages: [1]   Go Up
« previous next »