« previous next »
Pages: [1]   Go Down

Author Topic: 45 ACP Cylinder ?  (Read 808 times)

0 Members and 1 Guest are viewing this topic.

Offline Bob96

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 139
45 ACP Cylinder ?
« on: June 06, 2007, 03:00:06 PM »
  Anyone have a 45ACP cylinder for their FA 83 or 97?  Accuracy? Any function issues? I was wondering about accuracy as compared to a top 1911 as the bullet has farther to travel in the cylinder before hitting the barrel compared to an auto.
Logged

Offline paul105

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 304
Re: 45 ACP Cylinder ?
« Reply #1 on: June 07, 2007, 05:16:54 AM »
Bob96


John Taffin's article shows groups for 15 loads from the 45 ACP cyl in the FA97

http://www.sixguns.com/range/Fa45.htm

Paul
Logged

Offline dscp

  • Trade Count: (199)
  • Senior Member
  • *****
  • Posts: 1430
  • Gender: Male
  • Active Trader Life
Re: 45 ACP Cylinder ?
« Reply #2 on: June 07, 2007, 05:34:45 AM »
HOWDY!         I HAVE TWO DUAL RUGER BK 45'S . LOVE THEM BOTH . IN FACT I AM LOOKING FOR A SS 45 ACP CYLINDER FOR ANOTHER RUGER . THE 7 1/2 BK I HAVE HAD FOR ABOUT 40 YEARS AND IT WILL PROBABLY OUT SHOOT ME ANYTIME ! I AM UNFAMILIAR WITH THE PISTOLS YOU MENTION . ,BUT THEY SHOULD WORK AS WELL .
happy trails to you,
dscp
Logged
ENDOWEMENT MEMBER NATIONAL RIFLE ASSN
UNITED STATES NAVY RETIRED

Offline Ken ONeill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
Re: 45 ACP Cylinder ?
« Reply #3 on: June 08, 2007, 11:27:40 AM »
My Ruger and my FA 97 are both at least as accurate as any accurized 1911 I've ever owned.
Logged

Offline ktw

  • Trade Count: (0)
  • Member
  • *
  • Posts: 40
Re: 45 ACP Cylinder ?
« Reply #4 on: June 10, 2007, 03:40:31 PM »
I have the FA97 with both 45 Colt and 45acp cylinders.

I tend to use the acp cylinder a lot more than the colt cylinder.  ACP brass is cheap and plentiful and 45 colt brass is not.  I have not noticed any accuracy difference between the two cylinders. My ACP load is a 255 Keith at .452 over enough HS-6 to achieve 900-1000 fps. 

The only functioning problem I have run into is related to using 'dirty' powders in the acp cylinder over long range sessions.  Due to the tight chamber specs and the powder fouling I find myself having to exert some thumb pressure in order to get acp rounds to fully chamber after a while.  Stopping to clean the cylinder of fouling solves the problem.  I have never experienced this with the 45 Colt cylinder.

-ktw
Logged

Offline GetGunz

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Re: 45 ACP Cylinder ?
« Reply #5 on: June 27, 2007, 11:36:06 AM »
Model 83 Premier 454 & 45 ACP.  I shoot 45 ACP all the time.  Extremely accurate and makes a great companion at the range with my "modern" 1911's  ;)
Logged
Pages: [1]   Go Up
« previous next »