« previous next »
Pages: [1]   Go Down

Author Topic: loose barrel fit on a contender  (Read 707 times)

0 Members and 1 Guest are viewing this topic.

Offline coopershooter

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 563
loose barrel fit on a contender
« on: June 27, 2007, 12:43:43 PM »
i got a .204 ruger barrel for my contender carbine. its 23inches long,  bull barrel, it doesnt lock up tight when action is closed. i have several other carbine barrels that do. is this a locking lug issue?
  thank you!
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Re: loose barrel fit on a contender
« Reply #1 on: June 28, 2007, 04:26:39 AM »
Sounds like locking bolts. You may need to try a different set to get the right fit.
Logged

Offline coopershooter

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 563
Re: loose barrel fit on a contender
« Reply #2 on: June 28, 2007, 04:44:39 AM »
thanks! i can change them, but where do i get them?
Logged

Offline Davemuzz

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2009
Re: loose barrel fit on a contender
« Reply #3 on: June 28, 2007, 04:54:39 AM »
Before you order a new set, take a set off of a barrel that you have that works and install 'em on your "problem barrel". That way you will know for sure if it is the lugs or not.

Dave
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Re: loose barrel fit on a contender
« Reply #4 on: June 28, 2007, 06:00:17 AM »
What style frame are you putting the barrel on ? If it is the locking bolts...theres a chance i may have the ones you need.

G2  or Original Contender ?

There are several types of locking bolts...........
Logged

Offline coopershooter

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 563
Re: loose barrel fit on a contender
« Reply #5 on: June 28, 2007, 09:50:54 AM »
regular contender, i'll try some of the lugs from another barrel that fits.
thanks!
Logged

Offline Davemuzz

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2009
Re: loose barrel fit on a contender
« Reply #6 on: June 28, 2007, 11:24:56 AM »
Oh...if this doesn't work...just curious, but is this a factory T\C barrel?

Dave
Logged

Offline coopershooter

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 563
Re: loose barrel fit on a contender
« Reply #7 on: June 28, 2007, 02:09:13 PM »
yes it's a t/c barrel. 23 in. bull.
thanks!
Logged

Offline DropTheHammer

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 351
    • http://users.zoominternet.net/~flyfishr
Re: loose barrel fit on a contender
« Reply #8 on: July 06, 2007, 10:01:02 AM »
i put my 23" factory .17HRM on my Contender G2 carbine yesterday evening and noticed the same issue.  can grab the barrel near the action when closed and feel quite a bit of side to side play.  I was thinking hinge pin...  Figure if i call TC about it they will want me to send it in.  Cant live without it in the middle of chuck season though.... anyone know where i can get a set of lugs to try??  Will swap in a set off another barrel to try for starters
Logged
Pages: [1]   Go Up
« previous next »