« previous next »
Pages: [1]   Go Down

Author Topic: Help with 500 S&W  (Read 828 times)

0 Members and 1 Guest are viewing this topic.

Offline 6x6 elk

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 116
Help with 500 S&W
« on: August 28, 2007, 09:01:38 AM »
I'm having trouble getting my handi-rifle to shoot well. I'm getting 4'' groups at 50 yards, what factory ammo has been working for you guys? Help me before I spend a fortune on ammo!!
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Help with 500 S&W
« Reply #1 on: August 28, 2007, 09:17:25 AM »
Welcome to GBO! Ro shoots the Hornady ammo in his, link below. I have John Taffin's 500 S&W Handi review in .pdf format, let me know if you want to read it, I'll email it to you. ;)

Tim

http://www.gboreloaded.com/forums/index.php/topic,105725.msg1098298789.html#msg1098298789
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 6x6 elk

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 116
Re: Help with 500 S&W
« Reply #2 on: August 28, 2007, 09:31:13 AM »
That would be great! Any information would be helpful at this time
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Help with 500 S&W
« Reply #3 on: August 28, 2007, 09:33:09 AM »
On the way....if you don't get it, pm me your primary email addy, Hotmail has been a problem for larger files in the past. :-\

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 6x6 elk

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 116
Re: Help with 500 S&W
« Reply #4 on: August 28, 2007, 10:02:54 AM »
Thanks for the e-mail. The only problem with the information is all his shooting was done at 25 yards.Things will be different at 100 yards. I've tried the 300 gr evolution, and the accuracy was poor. Has anyone tried the winchester 400 gr platinum tip?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Help with 500 S&W
« Reply #5 on: August 28, 2007, 10:07:58 AM »
Shooting the 500 can be a good excuse to get into reloading, factory ammo is very costly, for not much more than a couple boxes of ammo, you can be handloading your own. ;) Mine shoots handloaded 350gr XTPs, 440gr Cast Performance and 700gr Ranger Rick's into 2" or less at 100yds. scoped. Just something to consider. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline eskimo36

  • Trade Count: (156)
  • Senior Member
  • *****
  • Posts: 1359
  • Gender: Male
    • Adventure Rider
Re: Help with 500 S&W
« Reply #6 on: August 28, 2007, 10:49:39 AM »
I only shoot lead but 2-3" at 100yards is the norm with bullet weights from 440 to 700gr.  Get into reloading with what ever you can afford and enjoy this very versatile round.  Start with 10 grains of unique under a 440 grain lead bullet and you will definitely enjoy shooting it....
Logged
"one shot is usually enough"

Offline greg916

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 410
  • Gender: Male
  • was mich nicht tötet, bildet mich stärker
Re: Help with 500 S&W
« Reply #7 on: August 28, 2007, 11:44:11 AM »
Tim, could I get you to send me John Taffin's review? Thanks!!
Logged
OSTENDO NON OSTENDO

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Help with 500 S&W
« Reply #8 on: August 28, 2007, 12:06:51 PM »
On the way, Greg! ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline indydave

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 105
Re: Help with 500 S&W
« Reply #9 on: August 28, 2007, 01:36:37 PM »
when shooting the 400 grain platinum tip (sxt ranger  formerly black talon) my handi unlocks itsself   wasssup with that?????? handloads of 44.0 grains lil -gun and a 325 gr barnes xpb spitzer do not do it i will go and group it over this weekend!
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Help with 500 S&W
« Reply #10 on: August 28, 2007, 02:04:13 PM »
Read the FAQs and Help sticky or Handi Basics 101 info, pop opens are easily fixed, either by yourself or H&R, depending on the cause, it's usually user error, but not always. I shoot 700gr cast bullets at over 1400fps and 350gr XTPs at ~2200fps, never had a pop open yet. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline ro

  • Trade Count: (4)
  • Contributor
  • ***
  • Posts: 272
Re: Help with 500 S&W
« Reply #11 on: August 30, 2007, 03:50:09 PM »
6x6 elk, i have not posted on here for a while, read your post about your 500 sw, i was shooting hornady 300 gr evolution factory loads, they were ok but not the best 100-150 yd groups, after season i changed mounts and scope, i tried alot of hand loads and factory loads, the best 100 yd plus groups i can get with this rifle is hornady 350 gr xtp/mag factory loads, 2805/2131/1610, so i going to stay with the hornady for this season, when i changed mounts and scope i went back with a nef ultra mount,warne rings, bushnell banner banner 3x9 matt scope. i am staying with this set-up for my 500 sw, i killed three deer with it last season with the old set-up, so this year it should be better, 6x6 elk if you hit one with the 500 it is going down,but i have all my other handis, 223,25-06,308,30-06,45/70 and 500 sw.                                                                                             

my deer camp/cabin burned a few years ago it was a big loss, i have been building a new log cabin/house on this land this year, i have been working all i can and weekends till dark trying to get the house finished before deer season, its coming along good i will try to post some pictures soon of the log cabin and food plots.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Help with 500 S&W
« Reply #12 on: August 30, 2007, 04:02:23 PM »
Welcome back ro, sorry to hear about the cabin, hope ya get it done for this season. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline ro

  • Trade Count: (4)
  • Contributor
  • ***
  • Posts: 272
Re: Help with 500 S&W
« Reply #13 on: August 30, 2007, 05:18:45 PM »
thank you tim yes it was a big loss, i bought that place and land back in 1992, it had a old farm house on the place we fixed it up over two years had a great cabin 3 bedrooms ,a/c,gas heat, big tv for the games, deck on back to watch food plots, it was nice but it all burned down, but after all that i am rebuilding a new 2400 sq.ft. log house/cabin, i have been working on this since the first of the year, i am a welder by trade i am glad i took off this hot summer 100 plus days for two months here in the south.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Help with 500 S&W
« Reply #14 on: August 30, 2007, 05:22:55 PM »
Sounds nice and will be worth the effort, looking forward to seeing pics.....with some dead deer hanging around!!! ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline ro

  • Trade Count: (4)
  • Contributor
  • ***
  • Posts: 272
Re: Help with 500 S&W
« Reply #15 on: August 30, 2007, 05:57:40 PM »
must i show all the deer?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Help with 500 S&W
« Reply #16 on: August 30, 2007, 06:11:47 PM »
As many as ya want!!! :D
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 6x6 elk

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 116
Re: Help with 500 S&W
« Reply #17 on: September 01, 2007, 06:07:18 AM »
RO; Thanks for the information. The 350gr. XTP was the next round I was planning to try, along with the Platinum tip. If anyone else has any suggestions on factory ammo to try I would greatly appreciate it.
Logged
Pages: [1]   Go Up
« previous next »