« previous next »
Pages: [1]   Go Down

Author Topic: Spraying on Lee case lube - question  (Read 537 times)

0 Members and 1 Guest are viewing this topic.

Offline jgalar

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1231
  • Gender: Male
Spraying on Lee case lube - question
« on: September 20, 2007, 04:08:40 AM »
What proportions do you use when you mix Lee case sizing lube with water for spray application?
Do you have to wait for it to dry or can you size immediately?

Thanks in advance for any and all replies.
Logged

Offline OR-E-Gun Bill

  • GBO Supporter
  • Trade Count: (18)
  • A Real Regular
  • *****
  • Posts: 907
  • Gender: Male
Re: Spraying on Lee case lube - question
« Reply #1 on: September 20, 2007, 07:04:20 AM »
I've not tried it myself, yet, but there are a few formulas mentioned in these product reviews for the LEE case lube at MidwayUSA:

http://www.midwayusa.com/eproductreview.exe/GetReviews?productid=482023


Bill
Logged

Offline charles p

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2374
  • Gender: Male
Re: Spraying on Lee case lube - question
« Reply #2 on: September 20, 2007, 10:07:12 AM »
I like the Lee lube that comes in a tube.  It is a white paste.  I put a dab on top of my left little finger and it stays there until I am through sizing.  As I pick up cases, I touch the necks to the paste and then twist in between my fingers.  I can even get left over paste back into the tube.  I is the least messy of all lubes to me and I rarely get an oil dent.
Logged

Offline jgalar

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1231
  • Gender: Male
Re: Spraying on Lee case lube - question
« Reply #3 on: September 20, 2007, 06:16:13 PM »
I've been using the Lee lube for years. I've tried other stuff, but the Lee lube works well for me. I have just never tried reducing it to spray it on.
Logged
Pages: [1]   Go Up
« previous next »