« previous next »
Pages: [1]   Go Down

Author Topic: Ruger Carbine  (Read 1031 times)

0 Members and 1 Guest are viewing this topic.

Offline smokepolehall

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 230
  • Gender: Male
Ruger Carbine
« on: October 27, 2007, 08:00:42 AM »
Yup i got mine out and sighted it in. Dead on at 25 yds. with its old universal 4x scope. Its one of the first ones made back in the 60's. Rifle not the scope!  I use 240gr. Win. JSP in it. Unless i get out of my tree stand my shots are 40 yds. max and thats only in spot! I will have to get a slipon recoil pad, as my old shoulder didn't cotton to the thumping it received while sighting in. 
Logged
Keep yer nose into the wind & slip from tree to tree in the shadows, you have come fer pilgrim! Miss Vixen & Miss Phoenix, I am The Vixenmaster!

Offline Ak.Hiker

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 389
Re: Ruger Carbine
« Reply #1 on: October 27, 2007, 05:20:15 PM »
I have an old Ruger Carbine as well. They are nice little guns. Interesting about the recoil. They are pretty light. I was looking at the Double Tap 240 Gold Dot load the other day and figured it would be a good one in the Ruger. I pretty much have stuck with the 240 JSP's in mine Remington or Winchester.
Logged

Offline smokepolehall

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 230
  • Gender: Male
Re: Ruger Carbine
« Reply #2 on: October 28, 2007, 12:52:33 AM »
I don't have die set fer mine so i just get the factory ammo.
Logged
Keep yer nose into the wind & slip from tree to tree in the shadows, you have come fer pilgrim! Miss Vixen & Miss Phoenix, I am The Vixenmaster!

Offline BlkHawk73

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1501
  • Gender: Male
Re: Ruger Carbine
« Reply #3 on: October 28, 2007, 02:57:09 AM »
  Just remember they can be sensitive to OAL of the cartridge.  Won't usually feed any that are on the long side to reliably.
Logged
"Never Surrender, Just Carry On."  - G.S.

Offline Ak.Hiker

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 389
Re: Ruger Carbine
« Reply #4 on: October 28, 2007, 06:40:00 AM »
If you want to try a 300 grain bullet I have never had feeding problems with the XTP. The 270 grain Speer Gold Dot runs pretty good too. Even so I figure the gun was designed for the 240 JSP or JHP so I stick with them. Norma at one time loaded a special carbine load. It was a steel jacketed 240 grain SP.
Logged

Offline nrb

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 134
Using different bullet weights in Ruger carbine
« Reply #5 on: November 17, 2007, 01:42:29 AM »
Several years ago, I experimented with light weight 44 cal bullets in my Ruger carbine. My findings were interesting. I was interested in increasing velocity by using 180 to 200 gr bullets. These lighter bullets gave very poor accuracy with 100yd groups around 4 to 5 inches. Heavier bullets, 240, 250, 270, and 300 all gave 1 to 2 inch groups. The experiment ended and I routinely use 240 or 270 gr bullets over H110 or Wiin296. I never had problems with the 300gr as long as they are seated to the recommended length.

best,       nrb
Logged

Offline Ak.Hiker

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 389
Re: Ruger Carbine
« Reply #6 on: November 18, 2007, 10:50:22 AM »
Years ago I ran some 180 grain Super Vel's thru my 44 Carbine. That was a hot load.
Logged
Pages: [1]   Go Up
« previous next »