Author Topic: Who uses Lube on their Sabots?  (Read 1185 times)

0 Members and 1 Guest are viewing this topic.

Offline rks1949

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 311
Who uses Lube on their Sabots?
« on: November 03, 2007, 05:16:50 PM »
 I was shooting the other day,and another shooter at the range was shooting his ML. I noticed he would rub a little lube on the sabot before loading. I've allways heard "not to put anything on the sabot,and to run it dry. After talking to him we went down range to get the targets,and I have to say,he shot one heck of a group,1-1/2 inches. Now I'm thinking of trying this. Maybe a little bore butter? Ron
UNCOMPENSATED ENDORSER

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: Who uses Lube on their Sabots?
« Reply #1 on: November 04, 2007, 01:28:08 AM »
I have used bore butter in my Encore on the sabot for many years. My accuracy is great also.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline K.K

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 533
Re: Who uses Lube on their Sabots?
« Reply #2 on: November 04, 2007, 01:14:32 PM »
I bore butter every sabot. Great accuracy, easier to load, less fouling. It does tend to to harden in cold weather, though. That makes it tough to get out of speed-loaders, or even out of the tube if you don't keep it warm, or next to your body.

Offline Semisane

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 569
Re: Who uses Lube on their Sabots?
« Reply #3 on: November 04, 2007, 03:18:23 PM »
A while back I bought a couple of packs of Harvester Crush Rib sabots and noticed that the back of the label card said "TO CHECK RIFLE FOR ACCURACY, CLEAN AND LUBE BARREL BETWEEN SHOTS".   So, I took my best load, a 300 grain Speer Gold Dot in a Harvester short sabot over 100 grains T-7 FFG and shot some groups by fully cleaning the barrel between shots, loading the bullet, then wiping the barrel on top of the load with a patch lightly dampened with Rem-Oil.  Got the best 5-shot groups I've ever gotten.  Now its my standard procedure.  The bonus is that I'm sighted in for clean barrel hunting and can leave the load in the barrel forever without worry about rust.
CLICK ON ME: .
Link to... highchairstands@cox.net

Offline rks1949

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 311
Re: Who uses Lube on their Sabots?
« Reply #4 on: November 05, 2007, 12:39:44 AM »
Your loading the bullet,then wiping down the bore "ahead" of the loaded bullet,with Rem Oil?
UNCOMPENSATED ENDORSER

Offline Semisane

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 569
Re: Who uses Lube on their Sabots?
« Reply #5 on: November 05, 2007, 05:09:03 AM »
Yep!  That's what I'm doing.  I clean the barrel completely between shots with two patches of Windex with Vinegar and two dry patches, then load, then oil.  I didn't want to follow the Harvester suggestion of "lube barrel between shots" because I didn't want the powder charge in contact with the oiled barrel.
CLICK ON ME: .
Link to... highchairstands@cox.net

Offline rks1949

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 311
Re: Who uses Lube on their Sabots?
« Reply #6 on: November 05, 2007, 08:10:27 AM »
Makes sense! I wonder if you lubed (lightly) the bore with Bore Butter before loading,if it would contaminate the powder?
UNCOMPENSATED ENDORSER

Offline Semisane

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 569
Re: Who uses Lube on their Sabots?
« Reply #7 on: November 05, 2007, 08:43:30 AM »
I'm not a bore butter fan.  My brother-in-law loves the stuff.  Go figure.  It's all in your head, ya' know!
CLICK ON ME: .
Link to... highchairstands@cox.net

Offline rks1949

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 311
Re: Who uses Lube on their Sabots?
« Reply #8 on: November 05, 2007, 10:52:17 AM »
Yeah,I've used Bore Butter in all my Muzzle Loaders for years,and never had the first problem with rust. Ron
UNCOMPENSATED ENDORSER