« previous next »
Pages: [1]   Go Down

Author Topic: Ruger M-77 quick (desperate) question  (Read 660 times)

0 Members and 1 Guest are viewing this topic.

Offline Pydpiper

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
Ruger M-77 quick (desperate) question
« on: January 05, 2008, 11:47:48 AM »
I am cleaning a .243 right now, in order to remove the bolt I took out a screw in a small 1-2 inch bracket on the left side of the receiver.
Now that it is off I see there is a spring pushed button in there, how do I get this back on?? :-\
Logged

Offline flintlock

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1405
  • Gender: Male
Re: Ruger M-77 quick (desperate) question
« Reply #1 on: January 05, 2008, 11:50:22 AM »
You don't need to remove that screw, just pull that release out and pull out the bolt....
Logged

Offline Pydpiper

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
Re: Ruger M-77 quick (desperate) question
« Reply #2 on: January 05, 2008, 11:57:14 AM »
Too Late.. I see what you mean though.

Now what?
Logged

Offline Pydpiper

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
Re: Ruger M-77 quick (desperate) question
« Reply #3 on: January 05, 2008, 12:14:51 PM »
OK, I got it..
That is something I would like to say I would only do once, but I got two M-77's today, a .243 and a .220 Swift, did the same thing to both guns..
So, it's something I wont do 3 times. ;D
Logged

Offline deltecs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1605
  • Gender: Male
Re: Ruger M-77 quick (desperate) question
« Reply #4 on: January 05, 2008, 12:26:55 PM »
Try a set of Vise grips with the jaws taped to prevent scratching the metal and hold the bracket in place while you put back the screw. 
Logged
Greg lost his battle with cancer last week on April 2nd 2009. RIP Greg. We miss you.

Greg
deltecs
Detente: An armed citizenry versus a liberal society
Opinion(s) are expressly mine alone and do not necessarily agree with those of GB or GBO mgmt.
Pages: [1]   Go Up
« previous next »