Author Topic: 22" or 24" bull  (Read 380 times)

0 Members and 1 Guest are viewing this topic.

Offline trigger--gitter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
22" or 24" bull
« on: November 28, 2007, 06:09:39 AM »
Sending in the frame for a new barrel, it will be used for varmit hunting, in missouri, does anyone know the weight difference between these two barrel lenghts in .223, is the extra 2 inches of barrel worth the weight and lenght ive heard that the 24" has a marked amount on incresed velocity but not much edge as far as accuracy, i know these topic have been covered, but looking for new and more info, thanks.

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
Re: 22" or 24" bull
« Reply #1 on: November 28, 2007, 06:15:04 AM »
I don't think the velocity difference is that much different for a 223.
One thing to consider is will you need the longer Ultra scope rail on the 24"
As far as accuracy my 22" hb will shoot -1" at 200yds.

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: 22" or 24" bull
« Reply #2 on: November 28, 2007, 06:55:57 AM »
There is very little weight difference between the 2 bbl's  and you will get superb accuracy from either it comes down to personnel preference more than anything. Kurt
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline trigger--gitter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
Re: 22" or 24" bull
« Reply #3 on: November 28, 2007, 10:01:39 AM »
thanks for the info, i think im going to go with the 22", it should handle alot better than the 26" 25-06