Author Topic: Marlin MR-7 Rifle  (Read 3668 times)

0 Members and 2 Guests are viewing this topic.

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Marlin MR-7 Rifle
« on: January 08, 2008, 04:41:21 PM »
I almost bought one of these back in the late 90`s. Anybody have any info one them and some pictures? Are they any good? These seam to be very hard to find now!!

Thanks-Jack

Offline jvs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1539
Re: Marlin MR-7 Rifle
« Reply #1 on: January 09, 2008, 11:07:50 AM »
You are right, the MR-7 came out in the mid 90's.  They were only available for 3 or 4 years.  MR-7 sold like hotcakes at first then died a fast death.  MR-7's did not have a faithful following after the first round of buyers, as is the case most of the time with new editions. 

MR-7's came out in .25-06, .30-06 and .270.  If Marlin made any other calibers in the MR-7 I don't know of them.  Marlin could have.

The MR-7 Copied designs from a few of the manufacturers of the time... Ruger, Remington, Winchester and Browning.  The Magazine was a copy of Browning, The bolt was a copy of Winchester.  I believe the Receiver was a copy of Remington.  I don't know where Ruger comes into it.  But Ruger is there somewhere.

I bought two of them when they came out.  My MR-7 .30-06 is the most accurate rifle in my cabinet and is my pride and joy.  But it took alot of gunsmithing to get it to this point.  My gunsmith told me if he charged me for all of his work, I could easily have doubled the price of the gun at the time.  He did not charge me full price as it was the first MR-7 he saw and he wrote a Letter to Marlin detailing the problems with the rifle.  Which Marlin acknowledged and thanked him for.  I paid for a trigger job but got full service.

Up until last summer the MR-7's were readily available for roughly $369 +/-  on the Auction Sites, which is just about what they sold for.  That has changed drastically.  Even though they are still available from time to time, the price has gone up for NIB examples.

Not oddly enough, it is the gun nobody wanted that gets the attention.  I doubt the MR-7 will get the attention the Marlin 55 Bolt Action gets, but the MR-7 will never be sold at a loss. 

One day I will sell the one MR-7 that I never opened to recoup the cost of both of them. 
 If you want to run with the Wolves, you can't Pee with the Puppies.

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Re: Marlin MR-7 Rifle
« Reply #2 on: January 09, 2008, 02:18:39 PM »
Thanks for the info!! I would pay $369 for a NIB one, but not more than that. If your NIB MR-7 is a .270 I am ready to buy!!

Jack

Offline jvs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1539
Re: Marlin MR-7 Rifle
« Reply #3 on: January 09, 2008, 09:47:41 PM »
My response to your solicitation was NOT an offer to sell the other MR-7.  Doing so in this forum isn't exactly the way GBO is set up.

Nor did you fully understand my game plan pertaining to my other MR-7, so whether it is a .270 or not is a moot point.

And if you wanted one NIB for $369, you should have had it by now.  Probably 10 years ago.  Like I said, last summer the prices started moving on auction website MR-7's.  $369 is no longer the price for a used MR-7, let alone a NIB.   And if retail prices keep rising for new rifles, I see no reason why used rifles and vintage NIB rifles should not keep pace. 

 If you want to run with the Wolves, you can't Pee with the Puppies.

Offline kyelkhunter3006

  • GBO Supporter
  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1576
  • Gender: Male
Re: Marlin MR-7 Rifle
« Reply #4 on: January 10, 2008, 08:54:56 AM »
The Ruger part of the MR-7 is the bolt handle.  Exactly like a Ruger M77.

Offline jvs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1539
Re: Marlin MR-7 Rifle
« Reply #5 on: January 10, 2008, 09:38:53 AM »
The Ruger part of the MR-7 is the bolt handle.  Exactly like a Ruger M77.

You could also say that the only thing that is strictly Marlin on the MR-7 is the Micro-Groove Rifling.

Marlin had big plans to expand on the available calibers but because of poor sales the MR-7 didn't go into Short Action or past those 3 long action calbers that I know of.  I think I also remember licensing problems from those other makers against Marlin, but that was inuendo at the time. 

The MR-7 is a good, solid rifle.  One made to old time specs.  Compared to what is made in modern times, this rifle has feel to it.

What you have to ask yourself now is - "is it worth the $795 price tag they are asking for NIB on the websites"
 If you want to run with the Wolves, you can't Pee with the Puppies.

Offline kyelkhunter3006

  • GBO Supporter
  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1576
  • Gender: Male
Re: Marlin MR-7 Rifle
« Reply #6 on: January 10, 2008, 09:45:53 AM »
I have a friend that has one of the first Mr-7's that was available in this area.  It's a really nice gun.  Shoots pretty well, lots of 5 shot groups less than 2" with factory ammo, which is darn good for an un-tuned factory gun and factory ammo, regardless of what the general perception is nowadays.  I should have bought the ones I've seen for a good deal, but for some reason, there always seems to be more good deals than I have money available.  Hmm??  The only thing I wished what that Marlin had a composite stock or a laminated stock for the gun too.

Offline 3DTESTIFY

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
Re: Marlin MR-7 Rifle
« Reply #7 on: January 25, 2008, 04:44:52 PM »
There was a four caliber offered in the final 2 years of production(1998-1999) & I have one.  My MR-7 is in .280 Remington, and it is the most accurate factory rifle in my vault. It's factory unaltered & was purchased a couple of years ago for $325.00 with a 3x9 Bushnell trophy scope aboard. I'll probably never part with it, that's how much I like the quality & fit/finish of this gun.

Offline Don Fischer

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1526
Re: Marlin MR-7 Rifle
« Reply #8 on: January 25, 2008, 05:50:35 PM »
help me out here. Someone said the MR-7's magazine was a copy of the Brouming. Wasn't browning using FN actions then and I thought the MR-7 was a rotary magazine?
:wink: Even a blind squrrel find's an acorn sometime's![/quote]

Offline mjbgalt

  • Trade Count: (26)
  • Senior Member
  • *****
  • Posts: 2367
  • Gender: Male
Re: Marlin MR-7 Rifle
« Reply #9 on: January 25, 2008, 05:55:26 PM »
i had never seen one before this week, but the one i saw was a copy of a winchester model 70, in .25-06.

-Matt
I have it on good authority that the telepromter is writing a stern letter.

Offline jvs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1539
Re: Marlin MR-7 Rifle
« Reply #10 on: January 25, 2008, 09:10:20 PM »
I thought the MR-7 was a rotary magazine?

No, the MR-7 does not have a rotary mag.  And Browning, Winchester have been under the FN umbrella for years.

The most recent production example of rotary mags is from Ruger in light calibers.  As far as I know, Ruger still produces them.  I know of no long action rotary mag in production.  It would be a bulky hand full if it was.
 If you want to run with the Wolves, you can't Pee with the Puppies.

Offline 3DTESTIFY

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
Re: Marlin MR-7 Rifle
« Reply #11 on: January 26, 2008, 06:42:10 AM »
The MR-7 magazine is a copy of the Browning A-Bolt design, with the removable mag attached to the floor plate, but without the scissor spring. The receiver and bolt face/lugs are similar to the Rem 700, the bolt handle a copy of the Ruger 77 & the 3 position safety and trigger assembly just like the Winchester Model 70.

Offline kyelkhunter3006

  • GBO Supporter
  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1576
  • Gender: Male
Re: Marlin MR-7 Rifle
« Reply #12 on: January 26, 2008, 07:52:55 AM »
The A-Bolt factory mags will also fit and function in the MR-7.

Offline mtbugle

  • Trade Count: (32)
  • Contributor
  • ***
  • Posts: 355
  • Gender: Male
Re: Marlin MR-7 Rifle
« Reply #13 on: January 30, 2008, 05:44:00 PM »
just got my "shooting times" and cover has marlins new XL7.  seems to be their new replacement for the mr-7.  wonder if that new screw on barrel with a nut is same thread as savage.  lots of possibilities if it is.  thanks don.

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Re: Marlin MR-7 Rifle
« Reply #14 on: February 02, 2008, 05:03:25 PM »
My response to your solicitation was NOT an offer to sell the other MR-7.  Doing so in this forum isn't exactly the way GBO is set up.

Nor did you fully understand my game plan pertaining to my other MR-7, so whether it is a .270 or not is a moot point.

And if you wanted one NIB for $369, you should have had it by now.  Probably 10 years ago.  Like I said, last summer the prices started moving on auction website MR-7's.  $369 is no longer the price for a used MR-7, let alone a NIB.   And if retail prices keep rising for new rifles, I see no reason why used rifles and vintage NIB rifles should not keep pace. 



I know that. I was just saying if you ever decide to sell it, I am not pushing you. You don`t have to lecture me about it and what GBO wants. Settle down cowboy!! I actually appreciate all of the info you supplied me. You didn`t have to lecture me though.

Jack

Offline jvs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1539
Re: Marlin MR-7 Rifle
« Reply #15 on: February 02, 2008, 10:31:57 PM »
Thanks for the info!! I would pay $369 for a NIB one, but not more than that. If your NIB MR-7 is a .270 I am ready to buy!!

Jack

Good, then I can say that my MR-7 is not for sale at this point, and if it was, it would be in the "Classifieds" forum, and not here.  Like GBO was set up.  I have no authority to lecture anybody here, nor do I want it.  But if you think that was bad, you should see what happens when the 'Big Kohuna' bring his hammer.

I understand your enthusiasm for the piece, and if you think you may be interested in the future in buying one, I can let you, or anyone else, know prior to listing in Private Message that I will be selling it.  If not, I am sure I won't have any problem getting rid of it.  I will be getting rid of it this year, just not now.  I am drawing down my inventory.


 
 If you want to run with the Wolves, you can't Pee with the Puppies.

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Re: Marlin MR-7 Rifle
« Reply #16 on: February 03, 2008, 06:37:30 AM »
Thanks for the info!! I would pay $369 for a NIB one, but not more than that. If your NIB MR-7 is a .270 I am ready to buy!!

Jack

Good, then I can say that my MR-7 is not for sale at this point, and if it was, it would be in the "Classifieds" forum, and not here.  Like GBO was set up.  I have no authority to lecture anybody here, nor do I want it.  But if you think that was bad, you should see what happens when the 'Big Kohuna' bring his hammer.

I understand your enthusiasm for the piece, and if you think you may be interested in the future in buying one, I can let you, or anyone else, know prior to listing in Private Message that I will be selling it.  If not, I am sure I won't have any problem getting rid of it.  I will be getting rid of it this year, just not now.  I am drawing down my inventory.


 

I appreciate your response!! I would appreciate first crack :) I am btween the MR7, Stevens 200 and the Ruger M77 Hawkeye;

Thanks-Jack

Offline jvs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1539
Re: Marlin MR-7 Rifle
« Reply #17 on: February 03, 2008, 09:34:39 AM »
There is no comparison between the MR-7 and a Stevens.  The Stevens always was and always will be a low end rifle from the Savage Corp.  That doesn't mean it won't shoot though.  The new Marlin bolt actions may be Marlins answer to the competition at the low end, but it will by no means be of the same quality as the MR-7...IMO.  I never held nor shot a Stevens 200 but everything I heard or read seems to point to the fact that it is decent performer for the price.

I never was a Ruger rifle fan either.  I can't tell you why but Rugers never caught my eye or impress me enough to make me want one.  Maybe someone who is more familiar with Ruger can help you out there.

You may also want to look at the Mossberg bolt action.  I would assume that it is close to what you get from Stevens, since it is the same company.

It should all come down to the level of quality you want, no matter what you buy.  In the end, you get what you pay for.  I have a friend who is still working on the first box of .30-06 ammo after 10 years.  For sure he doesn't need something more that what he has, a Savage 110.  IF that is how you are, then the Stevens would do you just fine. 
 
 If you want to run with the Wolves, you can't Pee with the Puppies.

Offline HogFan

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 375
  • Gender: Male
Re: Marlin MR-7 Rifle
« Reply #18 on: February 15, 2008, 07:32:56 AM »
I was told a few years back by a BPS employee that Marlin was sued, and in order to settle the agreement Marlin had to drop the MR-7. They were being sued to patent violations I believe.