« previous next »
Pages: [1]   Go Down

Author Topic: .222 10" Contender w/front sight  (Read 590 times)

0 Members and 1 Guest are viewing this topic.

Offline Pickwick

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
.222 10" Contender w/front sight
« on: December 22, 2007, 02:58:25 AM »
I have this barrel but it wont fit in the shoulder holster that I made with the front sight.  Is there a way to remove it, I cant see any screws.  Thanks
Logged

Offline tigmaned

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 259
  • Gender: Male
Re: .222 10" Contender w/front sight
« Reply #1 on: December 26, 2007, 02:55:11 AM »
the older ones where brazed on the barrel. you can get it off with some work but then there no going back unless you frill and tap.
Logged

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Re: .222 10" Contender w/front sight
« Reply #2 on: December 26, 2007, 04:42:36 AM »
Take a look at it from the muzzle end.  If it is one of the brazed on sights on a round barrel you will see a flat spot machined into the barrel.  Even if you remove the sight the flat spot will remain.
Logged
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin
Pages: [1]   Go Up
« previous next »